The effect of the parameters of thermal-rate treatment of melt on the iron-containing phases in alloy Al – 15% Si – 2.7% Fe is considered. The structure and mechanical properties of the alloy are determined after a thermal-rate treatment conducted at different temperatures of the melt, different pouring temperatures, and different holds at the pouring temperature. The optimum variants of thermal-rate treatment of melt for alloy Al – 15% Si – 2.7% Fe are chosen.
Similar content being viewed by others
References
M. Tebib, J. B. Morin, F. Ajersch, and X. G. Chen, Trans. Nonferrous Met. Soc. China, 20, 1743 – 1748 (2010).
S. S. Wu, X. L. Tu, Y. Fukuda, T. Kanno, and H. Nakae, Trans. Nonferrous Met. Soc. China, 13(6), 1285 – 1289 (2003).
K. Abedi and M. Emamy, Mater. Sci. Eng. A, 527, 3733 – 3740 (2010).
M. F. Kilicaslan, F. Yilmaz, S. J. Hong, and O. Uzun, Mater. Sci. Eng. A., 556, 716 – 721 (2012).
F. Wang, J. S. Zhang, B. Q. Xiong, and Y. G. Zhang, Mater. Charact., 60, 384 – 388 (2009).
A. K. Srivastava, V. C. Srivastava, A. Gloter, and S. N. Ojiha, Acta Mater., 54, 1741 – 1748 (2006).
M. Rajabi, A. Simchi, M. Vahidi, and P. Davami, J. Alloys Compd., 466, 111 – 118 (2008).
H. J. Huang, Y. H. Cai, H. Cui, J. F. Huang, J. P. He, and J. S. Zhang, Mater. Sci. Eng. A, 502, 118 – 125 (2009).
R. Ahmad and R. Marshall, Int. J. Cast Met. Res., 15, 497 – 504 (2003).
Q. L. Wang, H. R. Geng, M. Zhuo, F. Long, and X. Peng, Mater. Sci. Tech., 29(10), 1233 – 1240 (2013).
Q. L. Wang, Z. W. Zhang, F. Long, B. Guo, and H. R. Geng, Trans. Indian Inst. Met., 66(3), 257 – 264 (2013).
Q. L. Wang, S. Zhang, X. C. Yan, and H. R. Geng, JOM, 65(8), 958 – 966 (2013).
Y. J. Sun, Q. L. Wang, and H. R. Geng, J. Mater. Sci., 47, 2104 – 2109 (2012).
L. A. Narayan, F. H. Samuel, and J. E. Gruzleski, Metall. Mater. Trans. A, 25, 1761 – 1773 (1994).
S. X. He, J. Wang, B. D. Sun, and R. H. Zhou, Trans. Nonferrous Met. Soc. China, 11(6), 863 – 867 (2001).
L. Zhang, X. F. Bian, and J. J. Ma, Foundry [in Chinese], 10, 7 – 12 (1995).
Y. J. Sun, Q. L. Wang, C. C. Li, and H. R. Geng, J. Univ. Jinan [in Chinese], 26, 115 – 119 (2012).
J. Huang, H. T. Li, and R. Y. Wang, Ordnance Mater. Sci. Eng. [in Chinese], 4, 1 – 7 (1990).
S. K. Tan and Q. B. Ren, Special Casting & Nonferr. Alloys [in Chinese], 3, 31 – 33 (1998).
The authors would like to acknowledge the Natural Science Foundation of China (50871047 and 51271087) and the Natural Science Foundation of the Shandong Province (ZR2010EM071) for the support of the present work.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 26 – 31, July, 2016.
Rights and permissions
About this article
Cite this article
Wang, Q., Geng, H., Wang, F. et al. Effect of Parameters of Thermal-Rate Treatment of Melt on Iron-Containing Phases in Alloy Al – 15% Si – 2.7% Fe. Met Sci Heat Treat 58, 405–410 (2016). https://doi.org/10.1007/s11041-016-0025-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-0025-5