The structure and fracture behavior of a layer of maraging alloy deposited by laser surfacing on steel 3Kh3M3F is studied in the initial condition and after precipitation hardening at 550 and 600°C. Microhardness is measured in layer cross sections, and fractures after surfacing and aging are analyzed in an electron microscope.
Similar content being viewed by others
References
J. Jelenkowski, “Martensite transformation of quenched and aged austenite in M26NT2Nb steel,” J. Mater. Proc. Technol., 53, 195 – 202 (1995).
S. J. Kim and C. M. Waymanb, “Strengthening behavior and embrittlement phenomena Fe – Ni – Mn – (Ti) maraging alloys,” Mater. Sci. Eng. A, 207, 22 – 29 (1996).
L. T. Shiang and C. M.Wayman, “Maraging behavior in an Fe – 19.5Ni – 5Mn alloy I: Precipitation characteristics,” Metallography, 21:399423 (1988).
O. Dmitrieva, P. Choi, et al., “Pulsed-laser atom probe studies of a precipitation hardened maraging TRIP steel,” Ultramicroscopy, 111, 623 – 627 (2011).
N. H. Heo and H. C. Lee, “Effect of tungsten addition on the ductile-brittle-ductile transition in Fe – 8Mn – 7Ni – W maraging steels,” Scripta Metallurgica Materialia, 33(12), 2031 – 2035 (1995).
S. Horing, N. Wanderka, and J. Banhart, “The influence of Cu addition on precipitation in Fe – Cr – Ni – Al – (Cu) model alloys,” Ultramicroscopy, 109, 574 – 579 (2009).
J. Grum and J. M. Slabe, “A comparison of tool-repair methods using CO2 laser surfacing and arc surfacing,” Appl. Surf. Sci., 208 – 209, 424 – 431 (2003).
J. Grum and J. M. Slabe, “Possibility of introducing laser surfacing into maintenance service of die-casting dies,” Surf. Coat. Technol., 180 – 181, 596 – 602 (2004).
Z. L. P. Borrego, J. T. B. Pires, J. M. Costa, and J. M. Ferreira, “Mold steels repaired by laser welding,” Eng. Failure Anal., 16, 596 – 607 (2009).
V. Shtarbakov and I. Ivanov, “Structural features of tool steels welded-on with additional material of maraging alloy,” J. Mater. Sci. Technol., 21(2), 23 – 27 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 65 – 69, June, 2016.
Rights and permissions
About this article
Cite this article
Stavrev, D.S., Shcherbakov, V.S. Precipitation Hardening of Laser-Surfaced Layer of Maraging Alloy at the Surface of Steel 3Kh3M3F. Met Sci Heat Treat 58, 376–379 (2016). https://doi.org/10.1007/s11041-016-0020-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-0020-x