A method based on computer evaluation of mechanical properties and a mathematical model of vacuum carburizing are used for creating two nomograms, i.e., (1 ) for determining the parameters that the carburized layers of gears of steel 16Kh3NVFMB-Sh must have to obtain the required service properties and (2 ) for determining the values that the factors in periodic carburizing regimes must have to ensure that the layers have the prescribed parameters. The nomograms are used to determine the factors for two gears that are to undergo vacuum carburizing.
Similar content being viewed by others
References
F. J. Otto and D. H. Herring, “Vacuum carburizing of aerospace and automotive materials,” Heat Treating Progr., 5(1), 33 – 37 (2005).
A. E. Smirnov and M. Yu. Semenov, “Use of vacuum thermal and chemico-thermal treatment to harden heavily loaded parts of machines, equipment, and instruments,” Nauka i Obrazovanie, MGTU im. N. E. Baumana (Electronic journal). No. 2, 2014. DOI: 10.7463/0214.0700036 (posted 15.03.2015).
M. Yu. Semenov, “Design of technologies for the surface hardening of heavily loaded toothed wheels based on a numerical method,” Probl. Chernoi Metall. Materialoved., No. 2, 16 – 22 (2014).
G. S. Khovanskii, Nomography and Its Capabilities [in Russian], Gl. Redaktsiya Fiziko-Matematicheskoi Literatury Izd-va “Nauka,” Moscow (1977).
V. D. Kal’ner, S. Yu. Yurasov, V. B. Glasko, et al., “Nomograms of a nonlinear carburizing process,” Metalloved. Term. Obrab. Met., No. 1, 7 – 11 (1986).
V. D. Kal’ner, S. Yu. Yurasov, V. B. Glasko, et al., “Nomograms of a nonlinear carbonitriding process,” Metalloved. Term. Obrab. Met., No. 1, 7 – 11 (1986).
M. Yu. Semenov, “Certificate No. 2014617517, Russian Federation. Project KW 2014. Calculation of the stress state and heating of toothed wheels; applicant and owner M. Yu. Semenov, 29.05.2014,” Computer Program Registry, 24.07.2014.
M. Yu. Semenov, “Certificate No. 2014617519, Russian Federation. SimCarb VKS5. Mathematical modeling of the vacuum carburizing of steel VKS-5; applicant and owner M. Yu. Semenov, 29.05.2014,” Computer Program Registry, 24.07.2014.
M. Yu. Semenov, “Evaluating the contact fatigue limit of carburized toothed wheels of heat-resistant steel 16Kh3NVFMB-Sh based on numerical calculations,” Probl. Chern. Metall. Materialoved., No. 3, 5 – 10 (2014).
M. M. Saverin, Contact Strength of Materials under Simultaneous Normal and Shear Loads, TsNIITMASh, Book 2 [in Russian], Mashgiz, Moscow – Leningrad (1946).
M. Yu. Semenov, “Numerical estimate of the fatigue strength of carburized toothed wheels made of heat-resistant steels,” Metalloved. Term. Obrab. Met., No. 8(710), 28 – 33 (2014).
M. S. Eidinov, Design of Toothed-Gear and Worm-Gear Transmissions [in Russian], Mashgiz, Moscow – Sverdlovsk (1961).
M. Yu. Semenov and N. M. Ryzhov, “Use of numerical methods to analyze thermal processes in toothed gearing,” Tekhnol. Mashinostr., No. 4, 48 – 53 (2014).
M. Yu. Semenov and M. Yu. Ryzhova, “Evaluating the erosion resistance of heavily loaded toothed wheels on the basis of an energy model,” Ibid., No. 5, 64 – 69 (2012).
M. Yu. Semenov, “Controlling the formation of carburized layers in heat-resistant steels. Part I,” Metalloved. Term. Obrab. Met., No. 5(695), 31 – 38 (2013).
Yu. S. Eliseev, V. V. Krymov, I. I. Nezhurin, et al. Production of Toothed Wheels for Gas-Turbine Engines [in Russian], Vysshaya Shkola, Moscow (2001).
J. J. Coronado, S. A. Rodriguez, C. E. K. Mady, and A. Sinatora, “Mechanical properties of cementite in mottled cast iron,” in: Abrasion Wear Resistance Alloyed White Cast Iron for Rolling and Pulverizing Mills (2008), pp. 212 – 221.
G. V. Samsonov, G. Sh. Upadkhaya, and V. S. Neshpor, Physical Materialogy of Carbides [in Russian], Naukova Dumka, Kiev (1974).
N. I. Novikov, Theory of the Heat Treatment of Metals [in Russian], Metallurgiya, Moscow (1978).
M. A. Balter, Hardening of Machine Parts [in Russian], Mashinostroenie, Moscow (1978).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 47 – 52, May, 2016.
Rights and permissions
About this article
Cite this article
Semenov, M.Y. Nomograms to Determine the Controlling Factors in Vacuum-Carburizing Regimes. Met Sci Heat Treat 58, 293–298 (2016). https://doi.org/10.1007/s11041-016-0006-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-0006-8