The physicochemical properties, hardening, and corrosion resistance of austenitic chromium-nickel steels of type Kh18AN10 with different contents of impurities and different chromium concentrations (from the level of impurity to 0.220%) and of chromium-nickel-manganese steel Kh18N5AG9M2 are investigated.
Similar content being viewed by others
References
O. Bannykh, “Progress in the research and application of nitrogen-alloyed steels,” in: Proc. 10th Int. Conf. on High Nitrogen Steels [in Russian], Moscow, MISiS (2009), pp. 24 – 27.
H. Berns, S. Riedner, and V. Gavriljuk, “High interstitial stainless austenitic steels. Part 1. Constitution, heat treatment, properties, applications,” in: Proc. 10th Int. Conf. on High Nitrogen Steels [in Russian], Moscow, MISiS (2009), pp. 129 – 139.
A. G. Svyazhin, J. Siwka, and L. M. Kaputkina, “High-nitrogen steels — the current state and development trends,” in: Proc. Int. Conf. Advanced Steels, Metallurgical Industry Press, Beijing, China (2010), pp. 352 – 356.
S. Yu. Mushnikova, Yu. L. Legostaev, A. A. Khar’kov, et al., “A study of the effect of nitrogen on the resistance of austenitic steels to pitting corrosion,” Vopr. Materialoved., No. 2(38), 126 – 135 (2004).
H. Baba, T. Kodama, and Y. Katada, “Role of nitrogen in the corrosion behavior of austenitic stainless steels,” Corros. Sci., 44, 2393 – 2407 (2002).
U. K. Mudali, S. Ningshen, and B. Raj, “Passive films and localised corrosion—role of nitrogen,” in: Proc. 10th Int. Conf. on High Nitrogen Steels [in Russian], Moscow, MISiS (2009), pp. 271 – 280.
I. V. Gorynin, V. A. Malyshevskii, G. Yu. Kalinin, et al., “Corrosion-resistant high-strength nitrogen steels,” Vopr. Materialoved., No. 3(59), 7 – 16 (2009).
M. V. Kostina, O. A. Bannykh, V. M. Blinov, et al., “Nitrogenalloyed chromium corrosion-resistant steels of new generation,” Materialovedenie, No. 2, 35 – 44 (2001).
A. G. Rakhshtadt, L. M. Kaputkina, and S. D. Prokoshkin (eds.), Metal Science and Heat Treatment of Steel and Cast Iron, Vol. 2 [in Russian], Intermet Engineering, Moscow (2005), 528 p.
V. M. Schastlivtsev, V. I. Zel’dovich, D. A. Mirzaev, et al., Advancement of the Ideas of Academician V. D. Sadovskii [in Russian], IFM UrO RAN, Ekaterinburg (2008), 409 p.
L. M. Kaputkina, M. G. Medvedev, V. G. Prokoshkina, et al., “Effect of nitrogen alloying on the hardening and stability of austenite in a steel of type Kh18N10,” Izv. Vysh. Uchebn. Zaved., Chern. Metall., 57(7), 43 – 50 (2014).
L. M. Kaputkina, V. G. Prokoshkina, G. E. Khadeev, et al., “Diagrams of hot and warm deformation and strain hardening of austenitic nitrogen-containing steels,” Metalloved. Term. Obrab. Met., No. 6, 38 – 43 (2013).
Y. Y. Andreev, T. V. Bobkov, A. V. Dub, et al., “Thermodynamics of chemisorption of sulfur from thiocyanate on nickel during electrochemical passivation,” Protect. Met. Phys. Chem. Surf., 4(49), 444 – 450 (2013).
V. P. Grigor’ev, V. M. Kravchenko, and I. M. Gershanova, “Visible activation energy of anode dissolution of nickel in sulfate solutions in the presence of Cl–and CNS–anions,” Zashch. Met., 40(3), 236 – 242 (2004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 29 – 36, July, 2015.
Rights and permissions
About this article
Cite this article
Kaputkina, L.M., Smarygina, I.V., Kaputkin, D.E. et al. Effect of Nitrogen Addition on Physicochemical Properties and Corrosion Resistance of Corrosion-Resistant Steels. Met Sci Heat Treat 57, 395–401 (2015). https://doi.org/10.1007/s11041-015-9895-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-015-9895-1