Specimens of facing made from nickel-base powder on flat and cylindrical surfaces of steel 35 substrate, prepared in an inert gas atmosphere under action of fiber laser radiation with different regimes are studied. Metallographic studies of facing using precision analytical equipment are provided. The heat-affected zone, and microhardness distribution through substrate cross section and surfacing layers, are determined. Diffusion of base components into laser facing metal is studied.
Similar content being viewed by others
References
I. Smurov, “Laser cladding and laser assisted direct manufacturing,” Surf. Coat. Technol., 202(18), 4496 – 4502 (2008).
E. A. Morozov, A. V. Dolgovechnyi, and A. M. Khanov, “Laser facing on gas turbine engine blades,” Izv. Samar. Nauch. Tsentra Ross. Akad. Nauk, 14(1), 665 – 668 (2012).
C. N. Kwok, F. T. Cheng and H. C. Man, “Microstructure and corrosion behavior of laser surface-melted high-speed steels,” Surf. Coat. Technol., 202, 336 – 348 (2007).
A. P. Kuz’menko, S. N. Khimukhin, and N. A. Kuz’menko, “Mechanisms of microstructuring with laser treatment,” Vestn. TOGU, No. 4, 123 – 134 (2007).
N. A. Smirnova and A. I. Misyurov, “Features of forming structure with laser treatment,” Vestn. MGTU im. N. É. Baumana, Ser. Mashinostroenie, No. 6, 115 – 129 (2012).
A. G. Grigor’yants, I. N. Shiganov, and A. I. Misyurov, Laser Treatment production Processes [in Russian], Izd. MGTU im. N. É. Baumana, Moscow (2008).
V. N. Petrovskii, V. G. Shtamm, P. S. Dzhumaev, and V. I. Pol’-skii, “Laser facing of metal powders,” Yadern. Fiz. Inzh., 3(4), 1 – 7 (2012).
G. A. Turichin, E. V. Zemlyakov, E. Yu. Pozdeeva, et al., “Production possibilities of laser facing using powerful fiber lasers,” Metalloved. Term. Obrab. Met., No. 3, 35 – 40 (2012).
S. A. Self, “Focusing of spherical Gaussian beam,” Appl. Opt., 22(5), 658 (1983).
V. M. Lunev and O. V. Nemashkalo, “Adhesion characteristics of coatings and measurement methods,” Fiz. Inzh. Poverkhnosti, 8(1), 64 – 71 (2010).
Studies were partly supported by the Russian fund for fundamental research (grant 11-02-00912-a), RF Ministry of Education and Science (grant No. 2.5714.2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 30 – 34, May, 2014.
Rights and permissions
About this article
Cite this article
Koreshkov, R.N., Petrovskii, V.N., Dzhumaev, P.S. et al. Processing Features of Laser Facing Structure Formation Using Powerful Fiber Laser Radiation. Met Sci Heat Treat 56, 258–261 (2014). https://doi.org/10.1007/s11041-014-9742-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-014-9742-9