Results of a study of the effect of carburizing of the forming surfaces of cold upset dies from high-speed steel R6M5 and of the hardening temperature on the structure and properties of the dies are presented. It is shown that the hardness and endurance of the carburized tools can be raised by hardening from lower temperatures.
Similar content being viewed by others
References
Yu. A. Geller, Tool Steels, A Handbook [in Russian], Metallurgiya, Moscow (1975), 584 p.
I. Artinger, Tool Steels and Their Heat Treatment, A Handbook [Russian translation], Metallurgiya, Moscow (1982).
M. M. Severin, Cloud Burst Hardening [in Russian], Mashgiz, Moscow (1955), 312 p.
A. N. Tarasov, “Structure and properties of diffusion layers formed on alloyed steels due to carburizing in activated charcoal mixtures,” Metalloved. Term. Obrab. Met., No. 2, 32 – 35 (2007).
E. I. Bel’skii, M. V. Sitkevich, E. I. Ponkratin, and V. A. Stefanovich, Thermochemical Treatment of Tool Steels [in Russian], Nauka i Tekhnika, Minsk (1986), 248 p. 6. V. M. Ken’ko, V. A. Pigenko, and I. N. Stepankin, “About allowance for the production process in design of upset punches,” Kuzn.-Shtamp. Proizvod., No. 10, 26 – 30 (2001).
A. V. Belyi, V. A. Kukharenko, and A. P. Patelyuk, Surface Engineering of Structural Materials with Concentrated Flows of Nitrogen Ions [in Russian], Belorusskaya Nauka, Minsk (2007), 244 p. 8. L. I. Mirkin, A Handbook on x-ray Diffraction Analysis of Polycrystals [in Russian], Fizmatgiz, Moscow (1961), 864 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 19 – 23, March, 2013.
Rights and permissions
About this article
Cite this article
Stepankin, I.N., Ken’ko, V.M. & Boiko, A.A. Effect of Carburizing and Hardening Temperature on the Endurance of Forming Dies from Steel R6M5. Met Sci Heat Treat 55, 134–137 (2013). https://doi.org/10.1007/s11041-013-9593-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-013-9593-9