The influence of the duration of high-temperature tempering after air hardening from 900 and 1250°C on the properties, texture, and brittle point of steel 25KhN3MFA is studied. It is shown that the negative effect of superheating of the steel is weakened after high-temperature tempering. Recommendations are developed for optimization of heat treatment of large forgings.
Similar content being viewed by others
References
I. A. Borisov, “Effect of superheating on the texture and grains of rotor steel,” Metalloved. Term. Obrab. Met., No. 7, 3 – 9 (2010).
I. A. Borisov, A study of Special Features of Amendment of Coarse-Grained Structure in Steels for Cold-Rolling Rolls and Dies, Author’s Abstract of Candidate’s Thesis [in Russian], TsNIITMASh, Moscow (1968), 140 p.
I. A. Borisov, Research, Development and Installation of Steels and Processes of Heat Treatment for Large Rotors of Powerful Steam Turbines and Generators, Author’s Abstract of Doctoral’s Thesis [in Russian], TsNIITMASh, Moscow (1980), 665 p.
I. A. Borisov, “Heat treatment of critical parts in power machine building,” Metalloved. Term. Obrab. Met., No. 9, 2 – 6 (1979).
I. A. Borisov and A. I. Borisov, “Simulation of main heat treatment parameters for large forgings,” Metalloved. Term. Obrab. Met., No. 8, 16 – 18 (1995).
I. A. Borisov, “Choice of optimum parameters for quenching of large rotors from steel 25KhN3MFA,” Metalloved. Term. Obrab. Met., No. 12, 2 – 5 (1980).
I. A. Borisov, “Recrystallization of steel in coarse-grained condition during heating,” Metalloved. Term. Obrab. Met., No. 7, 8 – 10 (1995).
V. D. Sadovskii, Inheritance of Structure in Steel [in Russian], Metallurgiya, Moscow (1973), 171 p.
A. A. Astaf’ev and I. A. Borisov, “Amendment of coarsegrained structure of alloyed tool steels,” Metalloved. Term. Obrab. Met., No. 1, 41 – 45 (1968).
I. A. Borisov, “Refinement of austenite grains in large forgings from steel 25Kh3MFA,” Metalloved. Term. Obrab. Met., No. 2, 2 – 5 (1978).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 3 – 9, March, 2013.
Rights and permissions
About this article
Cite this article
Borisov, I.A., Dub, A.V. Effect of Duration of High-Temperature Tempering on the Texture and Grains of Superheated Rotor Steel. Met Sci Heat Treat 55, 117–123 (2013). https://doi.org/10.1007/s11041-013-9590-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-013-9590-z