On the basis of analyzing the effect structural factors on the mechanism of contact fatigue of complexly-alloyed heat-resistant steels requirements are determined for cemented layer parameters corresponding to high contact fatigue resistance. The possibility is demonstrated of implementing these requirements during cyclic vacuum cementation regimes.
Similar content being viewed by others
References
V. I. Sarak, S. O. Suvorova, and R. I. Éntin, “Tempering of structural steels under load,” Fiz. Met. Metalloved., 30(6), 1221 –1227 (1979).
I. P. Banas, A. I. Vil’chek, P. A. Mikhailov, and V. A. Ol’shanskii, “Study of contact fatigue of steels with different heat resistance,” Fiz. Khim. Mekh. Mater., 7(2), 3 – 7 (1971).
V. S. Ivanova and V. F. Terent’ev, Nature of Metal Fatigue [in Russian], Metallurgiya, Moscow (1975).
M. N. Goritskii and V. F. Terent’ev, Structure and Fatigue Failure of Metals [in Russian], Metallurgiya, Moscow (1980).
V. F. Terent’ev, “Stagewise process of fatigue failure of metallic materials,” Metally, No. 6, 14 – 20 (1996).
V. S. Ivanova, L. G. Orlov, V. F. Terent’ev, and V. G. Poida, “Features of the development of dislocation structure with static and cyclic loading of low-carbon steel,” Fiz. Met. Metalloved., 33(3), 627 – 633 (1972).
N. M. Ryzhov, R. S. Fakhurtdinov, A. E. Smirnov, et al., “Analysis of methods for cementing gear wheels of heat-resistant steels,” Metalloved. Term. Obrab. Met., No. 6, 31 – 36 (2010.
N. M. Ryzhov, A. E. Smirnov, R. S. Fakhurtdinov, et al., “Features of vacuum cementation for heat-resistant steel in acetylene,” Metalloved. Term. Obrab. Met., No. 6, 10 – 15 (2004).
N. M. Ryzhov, A. E. Smirnov and R. S. Fakhurtdinov,” Control of the impregnation by carbon of a diffusion layer during vacuum cementation of heat-resistant steels,” Metalloved. Term. Obrab. Met., No. 8, 10 – 15 (2004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 39 – 45, July, 2010.
Rights and permissions
About this article
Cite this article
Ryzhov, N.M. Technological provision of contact fatigue resistance for cemented gear wheels made of heat-resistant steels. Met Sci Heat Treat 52, 330–335 (2010). https://doi.org/10.1007/s11041-010-9277-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-010-9277-7