The effect of heating temperature for steel 23KhN3MFAin the range 900 – 1250°C on physical and mechanical properties, semibrittleness temperature, carbide phase, texture and austenite grain size is studied. The role of texture and grain size in changing mechanical properties is established. The effect of repeated heating temperature on weakening the deleterious effect of overheating is analyzed.
Similar content being viewed by others
References
V. D. Sadovskii, “Kinetics and structural mechanism of phase transformation on heating steel,” in: Problems of materials Science and Heat Treatment [in Russian], Moscow – Sverdlovsk (1956).
V. D. Sadovskii, Structural Inheritance in Steel [in Russian], Metallurgiya, Moscow (1973).
V. D. Sadovskii, “Structural mechanism of recrystallization on steel heating,” Metalloved. Term. Obrab. Met., No. 6, 26 – 27 (1977).
V. P. Drozd and V. M. Schastlivtsev, “Effect of heating rate on structural inheritance in steel,” Fiz. Met. Metalloved., 40(2), 379 – 387 (1975).
A. A. Astaf’ev and I. A. Borisov, “Improvement of a coarse grain structure fro alloyed tool steels, Metalloved. Term. Obrab. Met., No. 1, 41 – 45 (1968).
I. A. Borisov, “Austenite grain refinement in large forgings of steel 23KhN3MFA,” Metalloved. Term. Obrab. Met., No. 2, 205 (1978).
I. A. Borisov, “Heat treatment of critical components of power engineering,” Metalloved. Term. Obrab. Met., No. 9, 2 – 6 (1979).
I. A. Borisov, “Choice of optimum quenching parameters for large rotors of steel 23KhN3MFA,” Metalloved. Term. Obrab. Met., No. 12, 225 (1980).
I. A. Borisov, “Recrystallization of steel in a coarse grained condition on heating,” Metalloved. Term. Obrab. Met., No. 7, 8 – 10 (1995).
I. A. Borisov, Study of Features of Improvement of a Coarse Grained Structure in Steels for Cold Rolling Rolls and Dies, Author’s Abstract of Candidate’s Thesis [in Russian], TsNIITMASh, Moscow (1968).
I. A. Borisov, Study, Development and Introduction of Steels and Heat Treatment Technology for Large Rotors of Powerful Steam Turbines and Generators, Author’s Abstract of Doctoral’s Thesis [in Russian], TsNIITMASh, Moscow (1980).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 3 – 9, July, 2010.
Rights and permissions
About this article
Cite this article
Borisov, I.A. Effect of overheating on the texture and grain size of rotor steel. Met Sci Heat Treat 52, 294–299 (2010). https://doi.org/10.1007/s11041-010-9271-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-010-9271-0