Results of a study of the effect of diamond smoothening on the microhardness of deposited high-speed steel in the laser-affected zone and on the quality of surface after gas laser cutting are presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
E. V. Popov, V. G. Kovalev, and I. N. Shubin, Technology and Automation of Stamping [in Russian], Izd. MGTU Im. Baumana, Moscow (2003).
E. I. Semenov, O. A. Ganago, L. I. Zhivov, et al., Forging and Die Forming [in Russian], Mashinostroenie, Moscow (1987).
E. F. Perepletchikov and I. A. Ryabtsev, “Plasma-powder facing of cutting tools,” Svarochn. Proizvod., No. 11, 28 – 31 (2008).
N. S. Zunkov, L. E. Afanas’eva, V. P. Vodop’yanov, and M. N. Elitskii, “Surface laser hardening of parting dies,” in: Abs. Rep. Sci.-Eng. Conf. “Materials and Hardening Technologies-2008” [in Russian], Izd. Kursk Univ., Kursk (2008), pp. 200 – 205.
A. G. Grigor’yants, I. N. Shiganov, and A. I. Misyurov, Laser Treatment Processes [in Russian], MGTU Im. Baumana, Moscow (2006).
S. A. Ostapchik, V. S. Golubev, and A. G. Maklakov, Laser Technologies in Machine Building and Metal Treatment [in Russian], Belorus. Nauka, Minsk (2008).
N. G. Teregulov, B. K. Sokolov, and V. S. Matveeva, “Quality of treated surface in laser treatment and its control,” Defectoskopiya, No. 2, 62 – 72 (2007).
V. A. Boguslaev, V. K. Yatsenko, V. G. Yakovlev, et al., “Effect of diamond smoothening on the structure and properties of detonation-gas coatings of GTE parts,” Metalloved. Term. Obrab. Met., No. 1, 47 – 51 (2008).
J. Radziewska and S. L. Skrzypek, “Microstructure and residual stresses in surface layer of simultaneously laser alloyed burnished steel,” J. Mater. Proc. Technol., 209, 2047 – 2056 (2009).
L. Luca, S. Neagu-Ventzel, and I. Marinescu, “Effects of working parameters on surface finish in ball-burnishing of hardened steels,” Precision Eng., 29, 253 – 256 (2005).
C. Yeldose Binu and B. Ramamoorthy, “An investigation into the high performance of TiN-coated rollers in burnishing process,” J. Mater. Proc. Technol., 207, 350 – 355 (2008).
L. G. Odintsov, Hardening and Finishing of Parts by Surface Plastic Deformation [in Russian], Mashinostroenie, Moscow (1987).
A. G. Kosilova and P. K. Meshcheryakova, A Handbook of Technologist and Mechanical Engineer, Vol. 1 [in Russian], Mashinostroenie, Moscow (1985).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 40 – 43, December, 2009.
Rights and permissions
About this article
Cite this article
Razumov, M.S., Zubkov, N.S. & Afanas’eva, L.E. Effect of diamond smoothening on the structure and properties of the deposited metal in the laser-affected zone. Met Sci Heat Treat 51, 606–609 (2009). https://doi.org/10.1007/s11041-010-9220-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-010-9220-y