Special features and possibilities of increasing the efficiency of the process of direct alloying of steel and alloys by briquettes of carbonate manganese are analyzed. The results of the analysis are used to solve the problem of minimization of the duration of treatment of liquid alloys and ensuring maximum utilization of briquettes fed into the metal by mathematical simulation (prediction) of the effect of external thermophysical factors. Solution of this problem makes it possible to affect the controlled parameters of the production process (fraction size and initial temperature of the briquettes). The functional dependences of the parameters are used to develop a structural model of a system for automatic control of the process of direct alloying of alloys.
Similar content being viewed by others
References
A. V. Mokrinskii, A. N. Labrik, E. V. Protopopov, et al., “Technological concept of direct alloying of melts with manganese in converter-type units,” Stal’, No. 5, 22 – 23 (2004).
Yu. N. Nosov, V. P. Komshukov, V. V. Sokolov, et al., “Direct alloying of steel with manganese agglomerate in the ladle at the outlet from converter,” Stal’, No. 5, 32 – 35 (2004).
I. V. Tolstoguzov, I. E. Proshunin, V. F. Gumennyi, and O. I. Nokhrina, A method for Fabricating Briquettes for Direct Alloying of Steel with Manganese, RF Patent No. 2086675, C22B1_24, C22C35_00 [in Russian], Issued 10.08.1997.
R. S. Takhautdinov, A. Ya. Nakonechnyi, V. N. Urtsev, and D. M. Khabibulin, “Special features of a novel process of direct alloying of steel,” Stal’, No. 5, 20 – 22 (2005).
V. I. Zhuchkov, A. S. Noskov, and A. L. Zav’yalov, Dissolution of Ferroalloys in Liquid Metal [in Russian], UrO AN SSSR, Sverdlovsk (1990).
A. G. Ponomarenko, “A thermodynamic model of melting and the problem of design of a deterministic model of steel-melting process,” Stal’, No. 1, 19 – 23 (1991).
O. S. Bobkova, “About the mechanism of melting of oxide materials and reduction of metals from oxide melts,” Stal’, No. 1, 23 – 25 (1991).
T. D. Takenov, “About the use of phase diagrams for analyzing the processes of reduction in complex oxide systems,” Vestn. Akad. Nauk KazSSR, No. 8, 56 – 59 (1985).
S. O. Baisanov, A. Kh. Nurumgaliev, M. Zh. Tolymbekov, and K. K. Kaskin, “Resource-saving process for melting steels alloyed with manganese and chromium using complex silicon-aluminum ferroalloys as reducer and oxidizer,” Novosti Nauki Kazakhstana, No. 3, 61 – 64 (1995).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 21 – 27, November, 2009.
Rights and permissions
About this article
Cite this article
Dzhandieri, G.V., Surguladze, T.A., Robakidze, D.V. et al. Control of the process of direct manganese alloying of alloys. Met Sci Heat Treat 51, 533–539 (2009). https://doi.org/10.1007/s11041-010-9207-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-010-9207-8