Studies have been made on the effects of the time used in fast electrical pulse heating at high current densities (108–109 A/m2) followed by quenching on the structure and properties of 30KhGSA constructional alloy steel.
Similar content being viewed by others
References
Yu. E. Baranov, O. A. Troitskii, Yu. S. Avraamov, and A. D. Shlyapin, The Physical Principles of Electric-Pulse and Electroplastic Processing and New Materials [in Russian], MGIU, Moscow (2001).
I. M. Mal’tsev, “Property stability in subeutectoid constructional steels after high-speed electrothermal treatment,” Materialovedenie, No. 2, 49–52 (2003).
I. M. Mal’tsev, “Fast electrothermal treatment with high-density current in subeutectoid constructional steels,” Vopr. Materialoved., No. 4(40), 24–31 (2004).
I. M. Mal’tsev, L. A. Oshurina, and N. V. Suvorov, “Heating spring steel with current pulses,” Vopr. Materialoved., No. 1(37), 18–23 (2004).
I. M. Mal’tsev, “A study of fast electrothermal processing of metals with high-density currents,” Zavod. Lab., Diagn. Mater., 71(11), 35–38 (2005).
A. P. Gulyaev, Metallography: College Textbook, 6th Edition [in Russian], Metallurgiya, Moscow (1986).
I. M. Mal’tsev, L. A. Oshurina, Yu. N. Klimashov, et al., “Structure and properties of tool steels after fast electrothermal treatment,” Materialovedenie, No. 12, 29–35 (2004).
L. I. Bershtein and A. S. Siler, “A method of electrocontact processing of components made of spring steel in a water medium,” Metalloved. Term. Obrab. Met., No. 8, 11–12 (1995).
T. V. Komarova and D. N. Orlov, “Effects of technological factors on the microstructure of spring wire made of steel 70KhGFA,” in: New Technologies in Engineering, Metallurgy, Materials Science, and Higher Education: Intercollegiate Scientific Collection [in Russian], NGTU, Nizhny Novgorod (2001), pp. 267–269.
R. A. Andrievskii, Introduction to Powder Metallurgy [in Russian], Ilim, Frunze (1987).
I. M. Mal’tsev, O. A. Lebedeva, D. Yu. Vavilov, and G. N. Gavrilov, Patent for Utility Model No. 2007127434/22(02856) dated July 17, 2007, An Equipment for fast Electrothermal Treatment of Sheet Materials [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 42–45, June, 2009.
Rights and permissions
About this article
Cite this article
Mal’tsev, I.M. Fast processing of 30KhGSA steel with high-density current. Met Sci Heat Treat 51, 305 (2009). https://doi.org/10.1007/s11041-009-9156-2
Published:
DOI: https://doi.org/10.1007/s11041-009-9156-2