The effect of modes of ion-beam nitriding on the structure, microhardness, wear resistance, and magnetic properties of diffusion layer on typical austenitic stainless steel 12Kh18N10T is studied. Optimum modes of ion-beam nitriding ensuring maximum microhardness and wear resistance of the irradiated surface are determined. The nitriding temperature, the microhardness of the surface, and the signals of the overlaid magnetic and electromagnetic transducers are shown to be related. The dependences obtained are explained and recommendations are given on their use for the nondestructive check of parameters of the nitrided layer.
References
Yu. M. Lakhtin, Ya. D. Kogan, H.-J. Spies, et al., The Theory and Technology of Nitriding [in Russian], Metallurgiya, Moscow (1991).
A. V. Belyi, V. A. Kukareko, O. V. Lobodaeva, et al., Ion-Beam Treatment of Metals, Alloys and Ceramic Materials [in Russian], FTI, Minsk (1998).
A. V. Belyi and V. A. Kukareko, “About the problem of formation and role of nanocrystalline structures in surface layers of iron-base alloys subjected to ion-beam treatment with nitrogen,” in: Nanostructured Materials. Fabrication and Properties, Belarus – Russia, 30 – 31 May, 2000, Minsk, Belarus [in Russian] (2000), p. 168.
D. L. Williamson, O. Ozturk, S. Glick, et al., Nucl. Instrum. Meth. Phys. Res., B59/60, 737 (1991).
A. V. Belyi, V. A. Kukareko, V. I. Taran, et al., “Formation and properties of nanostructured surface layers in austenitic steels subjected to ion-beam nitriding,” Poverkhnost’, No. 7, 100 – 106 (2006).
A. Taylor, X-ray Metallography [Russian translation], Metallurgiya, Moscow (1965).
S. G. Sandomirskii, “Use of pole magnetizing in magnetic structural analysis (a review),” Defektoskopiya, No. 9, 36 – 64 (2006).
S. G. Sandomirskii, V. L. Tsukerman, I. I. Linnik, and E. G. Sandomirskaya, “Universal magnetic sorter and its use for solving problems of nondestructive check,” Kontrol’. Diagnostika, No. 8, 27 – 31 (2004).
N. N. Zatsepin, The Method of Higher Harmonics in Nondestructive Inspection [in Russian], Nauka i Tekhnika, Minsk (1980).
S. G. Sandomirskii, V. L. Tsukerman, and É. B. Sinyakovich, “An automatic device for electromagnetic control of the quality of HFC hardening of a local region of a small-size part,” Defektoskopiya, No. 7, 61 – 68 (2005).
V. F. Sukhovarov, Discontinuous Segregation of Phases in Alloys [in Russian], Nauka, Novosibirsk (1983).
B. S. Bokshtein, Diffusion in Crystals [in Russian], Metallurgiya, Moscow (1978).
A. Greer, “Changes in structure and properties associated with the transition from the amorphous to the nanocrystalline state,” Nanostruct. Mater., NATO ASI Series, No. 50, 143 (1998).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 9 – 14, March, 2009.
Rights and permissions
About this article
Cite this article
Belyi, A.V., Kukareko, V.A. & Sandomirskii, S.G. Effect of modes of ion-beam nitriding on the structure, microhardness, and magnetic properties of the diffusion layer on austenitic steel. Met Sci Heat Treat 51, 109 (2009). https://doi.org/10.1007/s11041-009-9126-8
Published:
DOI: https://doi.org/10.1007/s11041-009-9126-8