Basic parameters of the quality of microstructure (morphology, fineness, and distribution of carbide phases) and properties of forged preforms from complexly alloyed tool steels and alloys obtained with the use of four-striker forging device on AKP-500 press are determined.
Similar content being viewed by others
References
V. A. Lazorkin, Yu. F. Ternovoi, and Yu. V. Artamonov, “Four-striker forging device for hydraulic forging presses,” Kuzn.-Shtamp. Proizvod., No. 8, 43–44 (2000).
L. D. Moshkevich, S. I. Tishaev, N. E. Evlampieva, and A. N. Kurasov, “Regular features of formation of eutectic carbides in high-speed steels,” Stal', No. 10, 62–67 (1983).
V. A. Lazorkin, R. V. Yatsenko, and Yu. V. Mel'nikov, “Quality of forgings produced by radial forging on a hydraulic forging press,” Kuzn.-Shtamp. Proizvod., No. 5, 8–11 (2005).
A. G. Prigunova, Yu. V. Ternovoy, V. T. Zubkova, and V. N. Terekhov, “Effect of different methods of production on the structure and properties of tool alloys with intermetallic hardening,” in: Metallurgy [in Russian], ZGIA, Zaporozhe (2002), pp. 40–44.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 15–17, July, 2008.
Rights and permissions
About this article
Cite this article
Artamonov, Y.V., Bedrosova, L.V., Zubkova, V.T. et al. Microstructure and properties of complexly alloyed tool steels and alloys obtained with the use of four-striker forging device on AKP-500 press. Met Sci Heat Treat 50, 324–327 (2008). https://doi.org/10.1007/s11041-008-9077-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-008-9077-5