Studies have been made on the structure and on the phase and elemental compositions of the diffusion layer obtained by depositing an aluminum gas-thermal coating on steels St3sp, 10KhSND, and 09KhN2MD with subsequent heat treatment.
Similar content being viewed by others
References
S. S. Solntsev and A. T. Tumanov, Protective Coatings for Metals on Heating [in Russian], Mashinostroenie, Moscow (1976).
E. N. Grishina, S. S. Buinovich, V. G. Mangush, et al., “Production of thick-sheet steel,” in: Collection Works [in Russian], Metallurgiya, Moscow (1979), No. 4, pp. 74–76.
P. I. Polukhin, V. M. Klimenko, V. P. Polukhin, et al., Rolling Thick Sheets [in Russian], Metallurgiya, Moscow (1984).
P. T. Kolomytsev, Heat-Resisting Diffusion Coatings [in Russian], Metallurgiya, Moscow (1979).
Ya. Kh. Bakalyuk and E. V. Proskurkin, Tubes With Metallic Anticorrosion Coatings [in Russian], Metallurgiya, Moscow (1985).
V. R. Ryabov, Alitizing Steel [in Russian], Metallurgiya, Moscow (1973).
A. Hasui and O. Morigaki, Fusion Coating and Deposition [Russian translation], Mashinostroenie, Moscow (1985).
A. E. Titlyanov, B. Yu. Zelichenok, A. G. Radyuk, et al. “No. 94001366/02, RF Patent No. 2089652, IPC C23C4-00, A method of depositing an aluminum gas-thermal coating on blanks for heating before rolling: various forms,” submitted 10.01.94; published 10.09.97, Byull. Izobr. Polezn. Modeli, No. 23 (1997).
O. A. Kuvshinnikov, A. V. Golovanov, A. D. Kraev, A. E. Titlyanov, A. G. Radyuk, et al. “No. 2004105625-02, RF Patent No. 2256002, IPC C23C4-18, A method of depositing an aluminum gas-thermal coating on blanks for heating before rolling,” submitted 24.02.04; published 10.07.05, Byull. Izobr. Polezn. Modeli, No. 19 (2005).
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 42–45, June, 2008.
Rights and permissions
About this article
Cite this article
Golovanov, A.V., Radyuk, A.G., Slavov, V.I. et al. Structure and phase composition of the surface layer on steel after alitization. Met Sci Heat Treat 50, 300–302 (2008). https://doi.org/10.1007/s11041-008-9039-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-008-9039-y