Abstract
The effect of combined treatment (deposition of TiN coating + ultrasonic hardening) of compressor blades made from titanium alloy VT8M on impact and fatigue strength is considered.
Similar content being viewed by others
References
V. A. Boguslaev, P. D. Zhemanyuk, V. K. Yatsenko, et al., “Complex hardening of compressor blades,” Vestn. Dvigatelestr., No. 1, 96–100 (2002).
V. A. Boguslaev, V. P. Ben’, V. K. Yatsenko, et al., “Restoration of the carrying capacity of compressor blades using technological methods,” Novi Mater. Tekhnol. Metall. Mashinobud., No. 1, 72–76 (2003).
V. P. Alekhin, Physics of Strength and Plasticity of Surface Materials [in Russian], Nauka, Moscow (1983).
I. A. Birger, Residual Stresses [in Russian], Mashinostroenie, Moscow (1963).
V. A. Boguslaev, E. K. Yatsenko, P. D. Zhemanyuk, et al., Finish-Hardening Treatment of Gas-Turbine Engine Parts [in Russian], Izd-vo OAO Motor Sich, Zaporozhe (2005).
I. A. Stebel’kov, “USSR Inventor’s Certif. No. 456704. A method for strengthening parts,” Byull. Izobr. Polezn. Modeli, No. 2 (1975).
B. A. Serpetskii, S. V. Loskutov, V. V. Levitin, et al., “Increasing the precision and efficiency of x-ray diffraction measurements of macroscopic stresses,” Zavod. Lab., No. 3, 28–31 (1998).
V. A. Boguslaev, P. D. Zhemanyuk, V. K. Yatsenko, et al., “Formation of surface layer characteristics in compressor blades using complex treatment,” Vestn. Dvigatelestr., No. 1, 41–46 (2003).
M. S. Drozd, Determination of Mechanical Properties of Metals without Destruction [in Russian], Metallurgiya, Moscow (1965).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 1, pp. 28–33, January, 2008.
Rights and permissions
About this article
Cite this article
Zhemanyuk, P.D., Yatsenko, V.K., Luk’yanenko, O.L. et al. Improvement of impact and fatigue strength in compressor blades from VT8M alloy using combined treatment. Met Sci Heat Treat 50, 25–30 (2008). https://doi.org/10.1007/s11041-008-9004-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-008-9004-9