Abstract
The results of testing corrosion resistance longevity in coatings of the Ni-M-Cr-Al-Y system at temperatures of 800, 850, and 900°C are given. The kinetic dependences of corrosion are determined, successive stages of the degradation of coatings are identified, and the effect of alloying coatings with chromium and aluminum on their degradation and durability is established.
Similar content being viewed by others
References
V. I. Nikitin, Corrosion and Protection of Gas Turbine Impellers [in Russian], Mashinostroenie, Leningrad (1987).
V. I. Nikitin and I. P. Komissarova, “A method for testing durability of protective coatings,” Trudy TsKTI, No. 176, 67–73 (1980).
Yu. K. Petrenya, V. I. Nikitin, and A. I. Rybnikov, “Sulfide-oxide corrosion of materials and coatings on gas turbine impellers,” Trudy TsKTI, No. 176, 67–73 (1980).
G. V. Samsonov and I. M. Vinitskii, High-Melting Compounds [in Russian], Metallyrgiya, Moscow (1976).
R. E. Krzhizhanovskii and Z. Yu. Shtern, Thermophysical Properties of Metal Materials [in Russian], Énergiya, Leningrad (1973).
I. T. Goronovskii, Yu. T. Nazarenko, and E. F. Nekryach, Reference Book in Chemistry [in Russian], Naukova dumka, Kiev (1974).
V. I. Nikitin, “Alloying nickel alloys to protect them from sulfide-oxide corrosion,” Izv. Akad. Nauk SSSR, Metally, No. 1, 176–181 (1985).
V. I. Nikitin, I. P. Komissarova, G. D. Pigrova, et al., “Specifics of gas corrosion of nickel-based alloys,” Izv. Akad. Nauk SSSR, Metally, No. 5, 117–125 (1982).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 36–39, December, 2007.
Rights and permissions
About this article
Cite this article
Nikitin, V.I. Degradation of protective coatings of the Ni-M-Cr-Al-Y system due to sulfide-oxide corrosion. Met Sci Heat Treat 49, 585–588 (2007). https://doi.org/10.1007/s11041-007-0109-3
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0109-3