Abstract
Special features of the thermal kinetics of austenite transformation and of the hardenability of sintered steel 50N4D2M produced from partially alloyed powders are studied as a function of the concentration and of the uniformity of distribution of molybdenum. It is shown that the method of introduction of molybdenum into the initial powder affects substantially the stability of austenite in the sintered steel under continuous cooling. Concentrations of homogeneously and heterogeneously distributed molybdenum ensuring the same hardenability of the powder steel are determined.
Similar content being viewed by others
References
W. D. Jones, Fundamental Principles of Powder Metallurgy, Mills and Boon, London (1960).
F. A. Eisenkolb, Advances in Powder Metallurgy [Russian translation], Metallurgiya, Moscow (1969).
P. F. Lindskod and G. F. Bocchini, “Development of high strength P/M precision components in Europe, ” Int. J. Powder Met. Powder Technol., 15(3), 199–200 (1979).
O. Yu. Kalashnikova, “Special features of fracture of steels from partially alloyed powders,” Metalloved. Term. Obrab. Met., No. 2, 25–30 (2004).
P. W. Taubenblat, A. Stosuy, and M. Ohring, “Copper in the powder metallurgy of iron and steel,” in: I. Le May and L. McDonald Schetky (eds.), Copper in Ferrous Metals [Russian translation], Metallurgiya, Moscow (1988), pp. 168–211.
A. A. Obukhovich, N. V. Chesnokov, I. A. Gulyaev, O. Yu. Kalashnikov, et al., “A method for fabricating iron-based powder, RF Patent No. 2202446, MKI7 B22 F9/06, 1/00, Appl. 05.10.2001 No. 2001127140/02, “Severstal”’ Co. (RF), Publ. 20.04.2003,” Byul. Izobr. Polezn. Modeli, No. 11 (2003).
O. Yu. Kalashnikov, I. A. Gulyaev, and E. I. Dovgan’, “Structure and properties of structural powder steels,” in: The Theory and Technology of Forming and Sintering, Coll. Works of the Akad. Sci. USSR [in Russian], IPM, Kiev (1985), pp. 73–79.
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 12–16, June, 2007.
Rights and permissions
About this article
Cite this article
Kalashnikova, O.Y., Sorkin, L.P. Effect of the method of introduction of molybdenum on the hardenability and thermal kinetics of phase and structural transformations of steels produced from partially alloyed powders. Met Sci Heat Treat 49, 288–292 (2007). https://doi.org/10.1007/s11041-007-0051-4
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0051-4