Abstract
The structure, properties, and residual stresses in the fusion zone formed due to electron beam facing of a wear-resistant coating from chromium-manganese iron with nitrogen-alloyed austenitic matrix on thin-wall articles fabricated from low-carbon steel are studied.
Similar content being viewed by others
References
L. Zhao, M. Maurer, and E. Lugscheider, “Thermal spraying of nitrogen alloyed austenitic steel,” Thin Solid Films, 424(2), 213–218 (2003).
N. K. Gal’chenko, B. V. Dampilon, S. I. Belyuk, and V. L. Samartsev, “Coatings based on nitrogen steel with carbonitride reinforcement deposited by the method of electron beam facing,” Fiz. Khim. Obrab. Mater., No. 2, 61–65 (2003).
O. A. Bannykh and V. M. Blinov, Precipitation Hardening Non-magnetic Vanadium-Bearing Steels [in Russian], Nauka, Moscow (1980).
N. A. Dubovik, L. B. Zuev, and V. E. Pak, “Effect of the modes of thermomechanical treatment on the coefficient of strain hardening of austenitic steels with nitrogen,” Izv. Vuzov, Chern. Metallurg., No. 12, 35–37 (1997).
N. A. Dubovik, L. B. Zuev, and V. E. Pak, “Nature of hardening of high-nitrogen steels based on iron-chromium-manganese austenite,” Izv. Vuzov, Chern. Metallurg., No. 10, 61–64 (1997).
V. N. Volchenko (ed.), Welding and Weldable Materials [in Russian], Vol. 1, Metallurgiya, Moscow (1991).
D. V. Shtanskii, F. V. Kiryukhantsev-Korneev, A. N. Shveiko, et al., “Structure and properties of Ti-B-N, Ti-Cr-B-(N), and Cr-B-(N) coatings deposited by magnetron spraying of targets prepared by the method of self-propagating high-temperature synthesis,” Fiz. Tverd. Tela, 47, Issue 2, 242–251 (2005).
S. S. Gorelik, Yu. A, Skakov, and L. N. Rastorguev, X-ray and Electrooptic Analysis [in Russian], MISiS, Moscow (1994).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 19–22, February, 2007.
Rights and permissions
About this article
Cite this article
Narkevich, N.A., Ivanova, E.A. & Mironov, Y.P. Structure and properties of the fusion zone formed due to electron beam facing of a coating from nitrogen-alloyed chromium-manganese iron on low-carbon steel. Met Sci Heat Treat 49, 63–66 (2007). https://doi.org/10.1007/s11041-007-0012-y
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0012-y