Abstract
The presented complex methods for analyzing the processes of deformation and fracture, including the evaluation of process ductility and measurement of crack resistance characteristics, are based on joint analysis of loading diagrams, acoustic emission signals, and fractures of articles fabricated from low-strength alloys. The possibilities of the methods in evaluation of fracture resistance of thin-walled parts from zirconium alloys are shown.
Similar content being viewed by others
REFERENCES
S. A. Nikulin and V. G. Khanzhin, “Monitoring of materials, processes and technologies by the method of measuring acoustic emission,” Metalloved. Term. Obrab. Met., 4, 40–48 (1999).
S. A. Nikulin, M. A. Shtremel', V. G. Khanzhin, et al., in: Acoustic Emission: Standards and Technology Update, ASTM STP 1353 (1998).
S. A. Nikulin, “Two variants of deterioration of yielding stability upon tension and ductility of alloys, Fiz. Met. Metalloved., 81, Issue 3, 36–49 (1996).
M. A. Shtremel' and S. A. Nikulin, “Evaluation of toughness from macrogeometry of specimens,” Zavod. Lab., No. 4, 36–40 (1987).
S. A. Nikulin, M. A. Shtremel', and B. M. Fateev, “Evaluation of the anisotropy of crack resistance from macrogeometry of specimens,” Zavod. Lab., No. 6, 45–47 (1992).
S. A. Nikulin and V. G. Khanzhin, Zavod. Lab., No. 2, 61–63 (1991).
S. A. Nikulin, V. G. Khanzhin, A. V. Babukin, et al., “Evaluation of crack resistance of zirconium cladding pipes tested with measurement of acoustic emission,” in: Strength of Inhomogeneous Structures, Abs. Rep. 2nd Workshop, Moscow, April 20–22 [in Russian], Moscow (2004), p. 64.
S. A. Nikulin, V. G. Khanzhin, A. B. Rozhnov, and M. M. Peregud, “Effect of hardening of zirconium alloys on SCC in an iodine-bearing medium,” in: Strength of Inhomogeneous Structures, Abs. Rep. 2nd Workshop, Moscow, April 20–22 [in Russian], Moscow (2004), p. 25.
V. G. Khanzhin, M. A. Shtremel', and S. A. Nikulin, Defectoskopiya, No. 4, 35–40 (1990).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 43 – 50, April, 2005.
Rights and permissions
About this article
Cite this article
Nikulin, S.A., Khanzhin, V.G., Rozhnov, A.B. et al. Methods for Analyzing Deformation and Fracture Processes of Thin-Walled Parts from Low-Strength Alloys. Met Sci Heat Treat 47, 202–209 (2005). https://doi.org/10.1007/s11041-005-0052-0
Issue Date:
DOI: https://doi.org/10.1007/s11041-005-0052-0