The static performance of a composite type 4 CNG cylinder was investigated using a finite-element simulation and experimental validation. This cylinder involved a liner hoop wrapped with a fiber impregnated by a suitable resin. Tensile tests were performed on standard specimens to examine the mechanical properties of the composite material. Next, a finite-element simulation was performed to determine the static strength of a natural gas tank based on an appropriate criterion. To this end, using a stress analysis, the von Mises stresses were obtained in different parts of the tank to detect the critical area apt to fail. Then, a safety factor was calculated along composite layers, and components of the 3D stress tensor were determined for the critical layer failing before other layers. Eventually, the static performance of the full-scale tank was investigated using various well-known failure criteria of composite materials. Results indicated that the most accurate criteria should include the effects of compressive strength and 3D components of the shear stress.
This is a preview of subscription content, access via your institution.
Buy single article
Instant access to the full article PDF.
Tax calculation will be finalised during checkout.
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
Tax calculation will be finalised during checkout.
A. K. Agrawal and S. Kumar, “Fatigue life prediction of a hoop-wrapped composite CNG cylinder containing surface flow,” International Journal of Emerging Technology and Advanced Engineering, 4, 790-796 (2014).
H. S. Jee, J. O. Lee, N. H. Ju, and Y. H. Son, “Determinants of damage grade for vehicle CNG cylinder by the analysis of AE features during fatigue,” 18th World Conference on Nondestructive Testing, South Africa, (2012).
J. Wong, “Composite tank testing, Certification and Field Performance,” International Forum on Pressure Vessels for Hydrogen and Natural Gas Vehicles, Beijing, China, (2010)
B. Somerday, D. Farese, and J. Keller, “Hydrogen Effects on Materials for CNG/H2 Blends,” International Hydrogen Fuel and Pressure Vessels Forum, Beijing, China, (2010).
P. M. Patel and J. Rana, “Design & Optimization of LNG-CNG Cylinder for Optimum Weight,” International Journal for Scientific Research & Development, 1, 282-286 (2013).
D. S. Son and S. H. Chang, “Evaluation of modelling techniques for a type III hydrogen pressure vessel (70MPa) made of an aluminum liner and a thick fiber/epoxy composite for fuel cell vehicles,” International Journal of Hydrogen Energy, 37, No. 3, 2353-2369 (2012).
T. Sawant, N. K. Purwant, S. Kulkarni, and P. Karajagi, “Design & Stress Analysis of a Hoop Wrapped CNG Composite Vessel with an SAE-4135 Low Alloy Steel Liner,” International Engineering Research Journal, 338-343 (2016).
M. Nirbhay, S. Juneja, A. Dixit, R. K. Misra, and S. Sharma, “Finite element analysis of all composite CNG cylinders,” Procedia Materials Science, 10, 507-512 (2015).
M. Yazdani Aryatapeh, M. Azadi, M. Mashayekhi, and S. Ziaeerad, “Simulation of the failure of steel CNG tanks subject to crash using damage mechanics approach,” Journal of Oil Research, 87, 4-17 (2015).
M. Heaidari Rarani and A. Jebeli, “Finite element modeling of failure in IV type composite pressure vessel using WCM plug-in in ABAQUS software,” [in Persian], Modares Mechanical Engineering, 18, 191-200 (2018).
A. Khani, A. Vafaee Sefat, and S. Rahmati, “Weight optimization of a composite shell in IV type pressure vessel by Genetic algorithm,” [in Persian], Journal of Aerospace Mechanics, 2, 41-56 (2007).
K. Reza Kashyzadeh and S. Dolati, “Investigation of Mechanical Properties of Unidirectional Fibrous Composite by Micro-Mechanics Model,” Advanced Materials Research, 487, 481-486 (2012).
M. Idiart, K. Danas, and P. P. Castandena, “Second order theory for nonlinear composites and application to isotropic constituent,” Comptes Rendus Mecanique., 334, 575-581 (2006).
P. M. Mohite, “First-ply failure theories and damage mechanisms in unidirectional laminated composites”, Indian Institute of Technology Kanpur, (2017).
R. M. Christensen, “Stress based yield/failure criteria for fiber composites,” International Journal of Solids and Structures, 34, 529-543 (1997).
S. Agrawal, R. Khan, and A. Hussain, “Tensile test simulation of carbon fiber reinforced plastic,” Civil Engineering Systems and Sustainable Innovations, 297-305
P. Arul Jose, T. Sasi Kumar, P. Arun Bose, and A. KB, “Damage assessment on laminated composites under tensile test using finite element method,” Asian Journal of Applied Science and Technology, 1, 142-146 (2017).
K. Reza Kashyzadeh, S. Alipanah Kivi, and M. Rynkovskaya, “Fatigue life assessment of unidirectional fibrous composite centrifugal compressor impeller blades based on FEA,” International Journal of Emerging Technology and Advanced Engineering, 7, No. 5, 6-11 (2017).
A. Amiri Asfarjani, S. Adibnazari, and K. Reza Kashyzadeh, “Experimental and finite element analysis approach for fatigue of unidirectional fibrous composites,” Applied Mechanics and Materials, 87, 106-112 (2011).
ASTM D3039-17. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, (2017), www.astm.org
M. A. Torabizadeh, “Tensile, compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services,” Indian Journal of Engineering & Materials Science, 20, 299-309 (2013).
Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 56, No. 3, pp. 507-524, May-June, 2020.
About this article
Cite this article
Nouri, M., Ashenai-Ghasemi, F., Rahimi-Sherbaf, G. et al. Experimental and Numerical Study of the Static Performance of a Hoop-Wrapped CNG Composite Cylinder Considering Its Variable Wall Thickness and Polymer Liner. Mech Compos Mater 56, 339–352 (2020). https://doi.org/10.1007/s11029-020-09885-3
- CNG tank
- fuel cell vehicle
- composite type 4 CNG cylinder
- polymer liner
- static strength