For an analysis of internal and external buckling modes of a monolayer inside or at the periphery of a layered composite, refined geometrically nonlinear equations are constructed. They are based on modeling the monolayer as a thin plate interacting with binder layers at the points of boundary surfaces. The binder layer is modeled as a transversely soft foundation. It is assumed the foundations, previously compressed in the transverse direction (the first loading stage), have zero displacements of its external boundary surfaces at the second loading stage, but the contact interaction of the plate with foundations occurs without slippage or delamination. The deformation of the plate at a medium flexure is described by geometrically nonlinear relations of the classical plate theory based on the Kirchhoff–Love hypothesis (the first variant) or the refined Timoshenko model with account of the transverse shear and compression (the second variant). The foundation is described by linearized 3D equations of elasticity theory, which are simplified within the framework of the model of a transversely soft layer. Integrating the linearized equations along the transverse coordinate and satisfying the kinematic joining conditions of the plate with foundations, with account of their initial compression in the thickness direction, a system of 2D geometrically nonlinear equations and appropriate boundary conditions are derived. These equations describe the contact interaction between elements of the deformable system. The relations obtained are simplified for the case of a symmetric stacking sequence.
Similar content being viewed by others
References
A. N. Guz’, Stability of Elastic Bodies at Large Deformations [in Russian], Kiev, Nauk. Dumka, 1973.
V. V. Bolotin and Yu. N. Novichkov, Mechanics of Multilayered Structures [in Russian], M., Mashinistroenie, 1980.
Handbook of Composite Materials [Russian translation], vol. 2, red. J. Lubin, M., Mashinistroenie, 1988.
J. A. Suarez, J. B. Whiteside, and R. N. Hadcock, “The influence of local failure modes on the compressive strength of boron,” Epoxy Composites, ASTM Spec. Techn. Publ., 497, 1972.
B. Budiansky and N. A. Fleck, “Compressive failure of fiber composites,” J. Mech. Phys. of Solids, 41, Iss. 1, 183-211 (1993).
Y. Li Xu and K. L. Reifsnider, “Micromechanical modeling of composite compressive strength,” J. Compos. Mater., 27, No. 6, 572-588 (1993).
G. Zhang and R. A. Latour Jr., “FRP composite compressive strength and its dependence upon interfacial bond strength, fiber misalignment, and matrix nonlinearity,” J. Thermoplast. Compos. Mater., 6, No. 4, 298-311 (1993).
G. Zhang and R. A. Latour Jr., “An analytical and numerical study of fiber microbuckling,” Compos. Sci. Technol., 51, No. 1, 95-109 (1994).
A. Jumahat, C. Soutis, F. R. Jones, and A. Hodzic, “Fracture mechanisms and failure analysis of carbon fiber/toughened epoxy composites subjected to compressive loading,” Compos. Struct., 92, No. 2, 295-305 (2010).
N. A. Abrosimov and V. G. Bazhenov, Nonlinear Problems of Dynamics of Composite Structures [in Russian], N. Novgorod, Izd. NNGU, 2002.
A. N. Polilov, Etudes on Mechanics of Composites [in Russian], M., Fizmatgiz, 2015.
E. G. Grigolyuk and G. M. Kulikov, “General direction of development of the theory of multilayered shells,” Mech. Compos. Mater., 2, 231-241 (1988).
A. K. Noor and W. S. Burton “Assessment of computational models for multilayered composite shells,” Appl. Mech. Rev., 43, Nо. 4, 67-97 (1990).
N. K. Naik and R. S. Kumar, “Compressive strength of unidirectional composites: evaluation and comparison of prediction models,” Compos. Struct., 46, 299-308 (1999).
V. G. Piskunov and A. O. Rasskazov, “Development of the theory of layered plates and shells,” Prikl. Mekh., 38, No. 2, 22-57 (2002).
A. Ya. Alexandrov and L. M. Kurshin, Three-layer Plates and Shells, Vol. 2, Durability, Stability, Vibrations [in Russian], M. Mashinostroenie, 243-308 (1968).
V. V. Bolotin, “Stability and vibrations of multilayered plates. Calculations of strength,” M., Mashinostroenie, 11, 31-63 (1965).
E. I. Grigolyuk and P. P. Chulkov, “Nonlinear equation of gently sloped multilayered shells of regular structure,” Izv. AN SSSR. Mekh. Tverd. Tela, No. 1, 163-169 (1967).
V. N. Paimushin and V. I. Shalashilin, “Noncontradictory variant of deformation theory of continuous media in quadratic approximation,” Dokl. RAN, 396, No. 4, 492-495 (2004).
V. N. Paimushin and V. I. Shalashilin, “On the relations of deformations theory in the quadratic approximation and the problems of construction of refined variants of geometrically nonlinear theories of layered structural elements,” Prikl. Matem. Mekh., 69, Iss. 5, 861-881 (2005).
V. A. Ivanov, V. N. Paimushin, and V. I. Shalashilin, “A refined geometrically nonlinear theory and shear modes of loss of stability of three-layer shells with a transversely soft filler,” Izv. RAN. Mekh. Tverd. Tela, No. 3, 167-177 (2005).
V. N. Paimushin, “On the variational methods for solving nonlinear spatial problems on joining deformable bodies,” Dokl. AN SSSR, 273, No. 5, 1083-1086 (1983).
V. N. Paimushin, “Variational statement of problems on the mechanics of compound bodies with a piecevise homogeneous structure,” Prikl. Mekh., 21, No. 1, 27-34 (1985).
Shells Considering the Transverse Shear [in Russian],, ed. K. Z.Galimov, Kazan, Izd. Kazan. Univ., 1977.
V. N. Paimushin, “Nonlinear theory of medium flexure of three-layer shells with defects in the form of unsized sections,” Prikl. Mekh., 23, No. 11, 32-38 (1987).
V. N. Paimushin and S. N. Bobrov,” Refined geometric nonlinear theory of sandwich shells with a transversely soft core of medium thickness for investigation of mixed buckling forms,” Mech. Compos. Mater., 36, No. 1, 95-108 (2000).
B. L. Pelekh, Theory of Shells with a Finite Shear Stiffness [in Russian], Kiev, Nauk. Dumka, 1973.
R. B. Rikards and G. A. Teters, Stability of Composite Materials [in Russian], Riga, Zinatne, 1974.
B. L. Pelekh and V. A. Laz’ko, “Layered Anisotropic Plates and Shells with Stress Concentrations, [in Russian], Kiev, Nauk. Dumka, 1982.
N. A. Alfutov, P. A. Zinovyev, and B. G. Popov, Calculation Multilayered Plates and Shells of Composite Materials [in Russian], M., Mashinostroenie, 1984.
Acknowledgment
This research was performed within the framework of performance of the state task of the Ministry of Education and Science of Russia, No. 9.5762.2017/VU, project No. 9.1395.2017/PCh..
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 53, No. 5, pp. 881-906, September-October, 2017.
Rights and permissions
About this article
Cite this article
Paimushin, V.N. Refined Models for an Analysis of Internal and External Buckling Modes of a Monolayer in a Layered Composite. Mech Compos Mater 53, 613–630 (2017). https://doi.org/10.1007/s11029-017-9691-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-017-9691-7