We proposed a method for the evaluation of the mass fraction of zirconium and rare-earth metals by the method of atomic-emission spectrometry with inductively bound plasma in zirconium-based alloys and ligatures. The proposed procedure includes the preliminary microwave preparation of samples of zirconium alloys and the choice of analytical lines for detection of elements of the alloy. We perform the choice of the composition of mixture for dissolution and the parameters of microwave decomposition and establish the main and alternative analytical lines of emission of the detected elements free of significant spectral overlays. The metrological characteristics of the method aimed at the evaluation of the mass fractions of zirconium and rare-earth metals are evaluated. The limits of the relative errors of measurements of the mass fractions of elements within the range 1–90% do not exceed ±2% with a confidence probability P = 0.95.
Similar content being viewed by others
References
S. A. Budinovskii, S. A. Muboyadzhyan, and A. M. Gayamov, “State-of-the-art and main trends in the development of high-temperature heat-protective coatings for the working blades of turbines of the aircraft GTE,” Aviats. Prom., No. 4, 33–37 (2008).
A. M. Gayamov, S. A. Budinovskiy, S. A. Muboyadzhyan, and A. A. Kos’min, “Selection of heat-resistant coating for the refractory nickel rhenium-ruthenium-containing alloy of the VZhM4 grade,” Tr. VIAM (electr. Sci. J.), No. 1, Art. 01 (2014), DOI: dx.doi.org/https://doi.org/10.18577/2307-6046-2014-0-1-1-1.
A. A. Smirnov, S. A. Budinovskiy, and P. V. Matveev, “Investigation of the infl uence of negative electric potential of the substrate on the rate of precipitation of multicomponent nickel coatings on the surface of heat-resistant cast alloys,” Tr. VIAM (electr. Sci. J.), No. 2, Art. 05 (2015), DOI: 10.18577/2307-6046-2015-0-2-5-5.
E. N. Kablov, S. A. Muboyadzhyan, S. A. Budinovskiy, and A. N. Lutsenko, “Ion-plasma protective coatings for the blades of gas-turbine engines,” Metally, No. 5, 23–34 (2007).
E. N. Kablov, O. G. Ospennikova, and A. V. Vershkov, “Rare metals and rare-earth elements as materials for the present-day and future high technologies,” Tr. VIAM (electr. Sci. J.), No. 2, Art. 01 (2013), www.viam-works.ru.
E. N. Kablov and S. A. Muboyadzhyan, “Heat-shielding coatings for the blades of high-pressure turbines of promising GTE,” Metally, No. 1, 5–13 (2012).
D. A. Chubarov and S. A. Budinovskiy, “Choice of ceramic materials for the heat- shielding coatings of the blades of aviation turbines for working temperatures of up to 1400°C,” Tr. VIAM (electr. Sci. J.), No. 4, Art. 12 (2015), DOI: 10.18577/2307-6046-2015-0-4-12-12.
D. A. Chubarov and P. V. Matveev, “New ceramic materials for heat-shielding coatings of the working plates of GTE,” Aviats. Mater. Tekhnol., No. 4, 43–46 (2013).
S. A. Budinovskiy, D. A. Chubarov, and P. V. Matveev, “Contemporary methods of application of heat-shielding coatings to the blades of gas-turbine engines (a survey),” Aviats. Mater. Tekhnol., No. S5, 38–44 (2014), DOI: 10. 18577/2071-9140-2014-0-s5-38-44.
D. A. Chubarov, S. A. Budinovskiy, and A. A. Smirnov, “Magnetron method for the application of ceramic layers of heat-shielding coatings,” Aviats. Mater. Tekhnol., No. 4 (45), 23–30 (2016), DOI: 10.18577/2071-9140-2016-0-4-23-30.
F. N. Karachevtsev, N. V. Gundobin, and V. I. Titov, “Development of standard samples of the compositions of alloys intended for the aviation purposes,” Aviats. Mater. Tekhnol., No. 4, 393–398 (2012).
F. N. Karachevtsev, A. F. Letov, O. M. Protsenko, and M. S. Yakimova, “Development of standard samples of the composition of aviation alloys,” Stand. Obraztsy, No. 4, 30–34 (2013).
F. N. Karachevtsev, “Development of standard samples of heat-resistant nickel alloys for the detection of harmful admixtures in rare-earth elements by the spectral methods,” Stand. Obraztsy, No. 4, 46–55 (2015).
A. D. Shinde, R. Acharya, and V. R. Annareddy, Nucl. Eng. Technol., No. 49, 562–568 (2017), DOI: 10.1016/j.net. 2016.09.009.
R. M. Dvoretskov, F. N. Karachevtsev, T. N. Zagvozdkina, and E. A. Mekhanik, “Determination of the chemical composition of high-alloy nickel alloys intended for the aviation purposes by the AES IBP method in combination with the microwave preparation of samples,” Zavod. Lab., Diagn. Mater., 79, No. 9, 6–9 (2013).
F. N. Karachevtsev, R. M. Dvoretskov, and T. N. Zagvozdkina, “Microwave preparation of the samples of nickel alloys for the detection of alloying elements by the AES IBP method,” Tr. VIAM (electr. Sci. J.), No. 11, Art. 11 (2014), DOI: 10.18577/2307-6046-2014-0-11-11-11.
E. N. Kablov, “Innovative developments of the FGUP ‘VIAM’ GNTs RF on the realization of Strategic Directions in the Development of Materials and Technologies of Their Treatment for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1 (34), 3–33 (2015), DOI: 10.18577/2071-9140-2015-0-1-3-33.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No.11, pp. 68–72, November, 2019.
Rights and permissions
About this article
Cite this article
Karachevtsev, F.N., Dvoretskov, R.M. & Mikheeva, E.A. Evaluation of the Zr, Y, and Gd Contents in Targets for Magnetron Spraying of Heat-Shielding Coatings Based on Zirconium. Meas Tech 62, 1003–1007 (2020). https://doi.org/10.1007/s11018-020-01725-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-020-01725-z