Advertisement

Measurement Techniques

, Volume 59, Issue 9, pp 899–903 | Cite as

The Development of Measurement Systems and their Metrological Support

  • A. A. Danilov
GENERAL PROBLEMS OF METROLOGY AND MEASUREMENT TECHNIQUE
  • 62 Downloads

The stages in the development of measurement systems, their properties and structure, and terminology and metrological support are discussed.

Keywords

automated systems measurement systems metrological support stages of development 

References

  1. 1.
    GOST R 8.596-2002, GSI. Metrological Support of Measurement Systems. Basic Assumptions.Google Scholar
  2. 2.
    Decree No. 97 of the Ministry of Industry and Trade of the Russian Federation, On Approval of the Administrative Rule for Provision by the Federal Agency for Technical Regulation and Metrology of Government Services for Approval of the Type of Standard Samples or the Types of Means of Measurement, June 25, 2013.Google Scholar
  3. 3.
    MI 2314-2006, GSI. Codifying Groups of Means of Measurement.Google Scholar
  4. 4.
    GOST 16263-70, GSI. Metrology. Terms and Definitions.Google Scholar
  5. 5.
    MI 2247-93, GSI. Metrology. Basic Terms and Definitions.Google Scholar
  6. 6.
    RMG 29-99, GSI. Metrology. Basic Terms and Definitions.Google Scholar
  7. 7.
    Law No. 4871-I, Russian Federation, On Ensuring the Uniformity of Measurement, April 27, 1993.Google Scholar
  8. 8.
    MI 2438-97, GSI. Measurement Systems. Metrological Support. Basic Assumptions.Google Scholar
  9. 9.
    RMG 29-2013, GSI. Metrology. Basic Terms and Definitions.Google Scholar
  10. 10.
    International Vocabulary of Metrology. Basic and General Concepts and Associated Terms [Russian translated], VNIIM, BelGIM, Professional, St. Petersburg (2010).Google Scholar
  11. 11.
    A. A. Danilov, “Transfer of the dimension of units of quantity and the conditions for testing as applied to measurement systems,” Izmer. Tekhn., No. 4, 63–65 (2007).Google Scholar
  12. 12.
    RMG 74-2004, GSI. Methods of Determining Times between Testing and Calibration for Means of Measurement.Google Scholar
  13. 13.
    A. A. Danilov, “Methods of determining and correcting the times between testing and calibration of means of measurement,” Glav. Metrolog, No. 6, 29–36 (2005).Google Scholar
  14. 14.
    A. A. Danilov, Metrological Support of Measurement Systems, Politekhnika-Servis, St. Petersburg (2014).Google Scholar
  15. 15.
    Decree No. 1815 of the Ministry of Industry and Trade of the Russian Federation, On Establishing the Order of Testing of Means of Measurement, Specifications on the Test Signature, and Content of Test Certification, July 2, 2015.Google Scholar
  16. 16.
    E. M. Sheinin, “Metrology of large readout systems for energy resources,” Izmer. Tekhn., No. 12, 55–58 (2012).Google Scholar
  17. 17.
    M. V. Berzhinskaya, A. A. Danilov, Yu. V. Kucherenko, and N. P. Ordinartseva, “Calibration of means of measurement under working conditions,” Metrologiya, No. 1, 19–22 (2014).Google Scholar
  18. 18.
    GOST 8.438-81, GSI. Data-Measurement Systems. Testing. General Assumptions.Google Scholar
  19. 19.
    A. A. Danilov, Methods and Means of Evaluating the Nonlinearity of Conversion Functions of Measurement Transducers, Izd. Penz. Gos. Univ., Penza (2001).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  1. 1.Penza Center for Standardization and MetrologyPenzaRussia

Personalised recommendations