Results from the development of a standard system that implements a new method for measuring the pressure of vapors of saturated petroleum and petroleum products are presented. The characteristics of reference materials certified on the system are presented. The advantages of the system as compared to foreign analogs are evaluated, and the prospect for automation and approval of the system as a working standard is demonstrated.
Similar content being viewed by others
References
GOST 1756–2000, Petroleum Products. Determination of the Pressure of Saturated Vapors.
V. N. Gorobey, Yu. G. Zakharenko, M. Ya. Marusina, and V. S. Snegov, State Primary Standards of the Units of Physical Quantities, St. Petersburg State University ITMO, St. Petersburg (2011).
M. Ya. Marusina, B. A. Bazarov, M. P. Marusin, et al., “Magnetic system based on permanent magnets for a flowmeter of multiphase flowing media,” Izmer. Tekhn., No. 4, 62–65 (2014).
M. Ya. Marusina, B. A. Bazarov, M. P. Marusin, et al., “Design of a gradient system of a multiphase flowmeter,” Izmer. Tekhn., No. 5, 68–72 (2014).
ISO 3007–71, Petroleum and Petroleum Products. Determination of the Pressure of Saturated Vapors.
V. N. Gorobey, M. P. Krutovskii, and O. S. Vitkovskii, “Methods and means for the measurement of the pressure of saturated vapors of petroleum products,” Izmer. Tekhn., No. 3, 42–45 (2006).
O. S. Vitkovskii and N. R. Nikolaeva, “Analyzers of the pressure of saturated vapors of petroleum products,” Prib. Sreds. Avtomatiz., No. 8, 45–49 (2010).
ASTM D6377, Standard Method of Determining the Pressure of Vapors of Crude Petroleum: VPCRx Indicators (method of expansion).
ASTM D6378, Standard Method of Determining the Pressure of Vapors of Vapors (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Blends (method of triple expansion).
EN ISO 13016-1–2001, Liquid Petroleum Products. Determination of the Pressure of Saturated Vapors. Part 1. Determination of the Pressure of Air-Saturated Vapors (ASVP).
ASTM D323, Standard Test Method for Vapors Pressure of Petroleum Products (Reid method).
ASTM D4953, Standard Test Method for Vapors Pressure of Gasoline and Gasoline-Oxygenate Blends (dry method).
ASTM D6378, Standard Test Method for Vapors Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (triple expansion method).
ASTM D5191, Standard Test Method for Vapors Pressure of Petroleum Products (mini method).
GOST 9965–76, Petroleum for Petroleum Refi ning Enterprises. Technical Conditions.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Izmeritel’naya Tekhnika, No. 3, pp. 31–33, March, 2016.
Rights and permissions
About this article
Cite this article
Vitkovskii, O.S., Marusina, M.Y. Development of a Standard System for Metrological Assurance of Measurements of the Pressure of Saturated Vapors of Petroleum and Petroleum Products. Meas Tech 59, 247–251 (2016). https://doi.org/10.1007/s11018-016-0952-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-016-0952-y