Methods are considered for initiation of the inner interface between metal liquid and solid phases. The dependence of structure and temperature in an indium fixed point cell on initiation method is studied. Estimates are obtained for the density of heat flow with different inner boundary initiation methods. Optimum initiation conditions are determined in order to exclude undesirable thermal connections between a thermometer channel and cell walls.
Similar content being viewed by others
References
H. Preston-Thomas, “Int. Temp. Scale 1990 (ITS-90),” Metrologia, 27, 3–10 (1990).
B. W. Magnum, P. Blombergen, M. Chatttle, et al., “Optimum realization of the defining fixed points of the ITS-90 that are used for contact thermometry,” CCT Document 2000–13, Paris (2000).
B. W. Magnum, P. Blombergen, M. Chatttle, et al., “On the international temperature scale of 1990 (ITS-90) Part 11: Recommended techniques for comparisons at the highest level of accuracy of fixed point cells used for contact thermometry,” Metrologia, 36, 79–88 (1999).
A. G. Ivanova, M. Yu. Abasov, S. F. Gerasimov, and A. I. Pokhodun, “Measurement of In freezing point temperature: Effect of the liquid–solid interface structure. Temperature: Its measurement and control in science and industry” Proc. 9th Int. Temp. Symp., Los Angeles (2012), Vol. 8, pp. 243–248; AIP Conf. Proc., 1552, 243 (2013).
E. G. Pfann, Zone Melting, John Wiley & Sons Inc., N. Y. (1966).
M. Y. Abasov, S. F. Gerasimov, A. G. Ivanova, et al., “Measurement of Al freezing-point temperature: effect of initiation process,” Int. J. Thermophys., 31, 1663–1675 (2010), DOI 10.1007/s10765-010-0815-8.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Izmeritel’naya Tekhnika, No. 1, pp. 52–54, January, 2016.
Rights and permissions
About this article
Cite this article
Ivanova, A.G., Pokhodun, A.I., Gerasimov, S.F. et al. Study of the Inner Phase Interface Structure in an Indium Freezing Fixed Point Cell. Meas Tech 59, 75–79 (2016). https://doi.org/10.1007/s11018-016-0920-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-016-0920-6