The dependence of the error in measuring the differential resistance of nonlinear two-terminal networks on the amplitude of the harmonic test signal when using different types of ac–dc converters is obtained. It is shown that the smallest error is achieved for mean-rectified value converters. Numerical estimates are given using the example of a semiconductor diode.
Similar content being viewed by others
References
V. L. Aronov and Ya. A. Fedotov, The Testing and Investigation of Semiconductor Devices [in Russian], Vysshaya Shkola, Moscow (1975).
Yu. A. Kontsevoi and V. D. Kudin, Methods of Monitoring the Production Technology of Semiconductor Devices [in Russian], Energiya, Moscow (1973).
N. N. Goryunov and Yu. R. Nosov (eds.), Semiconductor Diodes. Parameters and Methods of Measurement [in Russian], Sov. Radio, Moscow (1968).
N. B. Gudkova et al., “A method of determining the parameters of a model of microwave diodes,” Elektron. Tekhn. SVCh-Tekhnika, No. 1, 80–86 (2007).
V. G. Gusev, I. A. Kosulin, and T. V. Mirina, “Measurement of the electrical parameters of nonlinear objects,” Izmer. Tekhn., No. 3, 60–62 (2006); Measur. Techn., 52, No. 3, 318–321 (2009).
GOST 18986.14-85, Semiconductor Diodes. Methods of Measuring Differential and Dynamic Resistances.
G. Ya. Mirskii, Electronic Measurements [in Russian], Logos, Moscow (2005).
A. G. Sergeev, Metrology: A Textbook [in Russian], Logos, Moscow (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 12, pp. 45–49, December, 2013.
Rights and permissions
About this article
Cite this article
Sergeev, V.A., Frolov, I.V. The Error When Measuring the Differential Resistance of Nonlinear Two-Terminal Networks. Meas Tech 56, 1421–1428 (2014). https://doi.org/10.1007/s11018-014-0394-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-014-0394-3