It is shown that the velocity of propagation of an electromagnetic field in samples of extended shape with a constant cross section depends on the structure of the sample material, its magnetic properties and, in particular, the viscosity, shape and dimensions of the cross section and the excitation frequency.
Similar content being viewed by others
References
V. I. Chechernikov, Magnetic Measurements [in Russian], Edited by E. I. Kondorskii, Izd. MGU, Moscow (1963).
I. I. Kifer, Testing of Ferromagnetic Materials [in Russian], Energiya, Moscow (1969).
V. A. Sandovskii, “A computer method of measuring dynamic hysteresis loops for the nondestructive testing of articles,” Zavod. Lab. Diagnostika Materialov, 73, No. 10, 28 (2007).
G. V. Vida, E. S. Gorkunov and V. M. Shevnin, Magnetic Monitoring of the Mechanical Properties of Rollings [in Russian], UrO RAN, Ekaterinburg (2002).
V. F. Matyuk et al., “Monitoring of strength characteristics and the quality of the heat treatment of ferromagnetic articles using the parameters of the hysteresis loop and the remanence for local magnetization by a pulsed magnetic field of varying amplitude. III. 50KhGFA steel,” Defektoskopiya, No. 8, 57 (2005).
R. E. Ershov, The Higher-Harmonics Method in Nondestructive Testing [in Russian], Nauka i Tekhnika, Novosibirsk (1980).
V. V. Dyakin and V. A. Sandovskii, Electrodynamics Problems in Nondestructive Testing [in Russian], UrO RAN, Ekaterinburg (2008).
A. I. Kadochnikov, “Dynamic magnetization of magnetic circuits of transformer steel under the action of different forms of voltage,” Elektrich., No. 9, 62 (2003).
A. I. Kadochnikov,Yu. N. Starodubtsev, and V. P. Malyuk, “A theoretical interpretation of a family of dynamic hysteresis loops of a magnetic circuit of nanocrystalline tape,” Elektrich., No. 2, 49 (2009).
V. A. Sandovskii, Patent No. 2362158 RF, Izobr. Polez. Mod., No. 20 (2009).
V. A. Sandovskii, “Magnetic properties of ferromagnetic cores in a low-frequency uniform field,” Defektoskopiya, No. 10, 58 (2005).
M. L. Lobanov et al., “The possibility of the nondestructive testing of the grain size at the intermediate stages of the production of transformer steel,” Defektoskopiya, No. 8, 55 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 4, pp. 50–53, April, 2010.
Rights and permissions
About this article
Cite this article
Sandovskii, V.A. Investigation of the properties of samples of lengthwise-extended shape using the velocity of propagation of an electromagnetic field. Meas Tech 53, 426–430 (2010). https://doi.org/10.1007/s11018-010-9520-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-010-9520-z