Specifications, circuitry, and recommendations for the use of the OK6-13 automatic complex for testing instruments for the measurement of the parameters of fiber-optic transmission systems are presented. The complex supports tests of measurement instruments designed for operating at wavelengths of 0.85, 1.31, and 1.55 μm.
Similar content being viewed by others
References
V. N. Gavrilov et al., “Set of fiber-optic modules for automatic modular mains system based on the VXI bus,” Antenny, Iss. 7(86), 23 (2004).
State Standard GOST 8.585-2005, GSI. State Accuracy Chart for Instruments Used in the Measurement of the Length and Period of Propagation of a Signal in a Light Conductor, Mean Power, Attenuation, and Length [in Russian].
MI 2558-99, GSI. State Accuracy Chart for Instruments Used in the Measurement of the Mean Power of Optical Radiation in Fiber-Optic Transmission Systems [in Russian].
MI 2930-2005, GSI. Optical Tunable Attenuator for Fiber-Optical Transmission Systems: Testing Technique [in Russian].
V. E. Kravtsov et al., “Modern optical reflectometers. Questions of metrological support,” Metrol. Izmer. Tekhn. Svyazi, No. 2, 38 (1999).
GET 170-2008. State Special Standard of Unit of Length and Unit of Period of Propagation of a Signal in a Light Conductor, Mean Power, Attenuation, and Wavelength for Fiber-Optic Transmission Communications and Information Transmission Systems [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 11, pp. 25–29, November, 2009.
Rights and permissions
About this article
Cite this article
Voronin, R.M., Gavrilov, V.N., Gryaznov, Y.M. et al. Automatic workstation for testing instruments used in the measurement of the parameters of OK6-13 fiber-optic transmission systems. Meas Tech 52, 1172–1179 (2009). https://doi.org/10.1007/s11018-010-9415-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-010-9415-z