References
E. A. Golubev, Izm. Tekh.,No.3, 6 (2008); Meas. Tech., 51, No.3, 232 (2008).
S. F. Levin, Izm. Tekh., No.9, 15 (2007); Meas. Tech., 50, No. 9, 921 (2007).
A. E. Fridman, Izm. Tekh., No.3, 68 (2008); Meas. Tech., 51, No. 3, 339 (2008).
A. G. Chunovkina, Izm. Tekh., No. 3, 70 (2008); Meas. Tech., 51, No. 3, 341 (2008).
State Standard GOST 8.009-84, GSI. Normalization and Use of the Metrological Characteristics of Measuring Instruments.
State Standard GOST 8.508.84, GSI. Metrological Characteristics of Measuring Instruments and the Accuracy Characteristics of Means of Automating GSP: General Methods of Estimation and Monitoring.
RD 50-453-84, GSI. The Error Characteristics of Measuring Instruments under Practical Operating Conditions: Calculation Methods.
State Standard GOST 8.207-76, GSI. Direct Measurements with Multiple Observations. Methods of Processing Observation Results: Basic Propositions.
MI 2083-90, GSI. Recommendations. Indirect Measurements: Determination of the Results of Measurements and the Estimation of Their Errors.
R 50.2.038-2004, GSI. Single Direct Measurements: Estimation of the Errors and Uncertainties of Results of Measurements: Recommendations on Metrology.
RMG 43-2001, GSI. The Use of the Guide to the Expression of Uncertainty in Measurement.
V. A. Slayev (ed.), Guide to the Expression of Uncertainty in Measurement, VNIIM im D. I. Mendeleeva, St. Petersburg (1999).
V. P. Kuznetsov. Izm. Tekh., No. 8, 21 (2003); Meas. Tech., 46, No. 8, 751 (2003).
R/GM/11:2007, Recommendation. The State of Comparisons of the Standards of National Metrological Institutes KOOMET.
E. G. Mironov and V. A. Firsanov, Prib. Sistemy Razved. Geofiziki, No. 3, 20 (2006).
A. S. Doinikov, Zakon. Prikl. Metrologiya, No. 1, 43 (2006).
State Standard GOST 8.401-80, GSI. Classes of Accuracy of Measuring Instruments: General Requirements.
Author information
Authors and Affiliations
Additional information
Translated from Izmeritel’naya Tekhnika, No. 2, pp. 70–72, February, 2009.
Rights and permissions
About this article
Cite this article
Mironov, E.G. A brief comparative analysis of the concepts of “error” and “uncertainty” of measurements. Meas Tech 52, 212–214 (2009). https://doi.org/10.1007/s11018-009-9247-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-009-9247-x