The article considers the issues of manufacturing a tungsten-titanium-cobalt alloy produced by spark plasma sintering of hard-alloy electroerosive powders under conditions of rapid heating and short working cycle time. It is noted that the use of the method of spark plasma sintering of powder produced by electroerosive dispersion of the T5K10 alloy allows producing a tungsten-titanium-cobalt hard alloy with improved physical and mechanical properties without a significant increase in the cost of its manufacture and ensuring high performance of products due to their favorable structure and low porosity.
Similar content being viewed by others
References
S. I. Bogodukhov, A. S. Kilov, E. S. Kozik, et al., “Improving the wear resistance of the T5K10 alloy,” Vestn. Orenburg. Gos. Univ., No. 10 (116), 127–130 (2010).
M. I. Dvornik and A. V. Zaitsev, “Variation in strength, hardness, and fracture toughness in transition from medium-grained to ultrafine hard alloy,” Russ. J. Non-Ferr. Met., 59, No. 5, 563–569 (2018).
M. I. Dvornik and E. A. Mikhailenko, “Using the carbon deficiency to create a gradient nanostructured hard alloy,” Byull. Nauch. Soobshch., No. 23, 22–27 (2018).
I. A. Pinakhin, V. A. Chernigovskii, A. A. Bratsikhin, and M. A. Yagmurov, “Improving the wear resistance of VK6, VK8, T5K10, and T15K6 hard alloys by volume pulsed laser hardening,” Trenie Iznos, 36, No. 4, 429–432 (2015).
I. A. Pinakhin, V. A. Chernigovskii, A. A. Bratsikhin, et al., “Complex study of physical and mechanical properties of VK6, VK8, and T5K10 hard alloys subjected to volumetric pulsed laser hardening,” Zavodsk. Labor. Diagnost. Mater., 83, No. 3, 37–40 (2017).
V. V. Uglov, A. K. Kuleshov, G. E. Remnev, and M. S. Saltymakov, “Modification of hard alloy by the action of high power ion beams,” Surf. Coat. Tech., 206, No. 5, 781–784 (2011).
A. K. Kuleshov, V. V. Khodasevich, V. V. Uglov, et al., “Thermal stability of surface layers of titanium and chromium nitrides formed by condensation with ion bombardment on a solid T5K10 alloy,” Perspekt. Mater., No. 2, 68–73 (2009).
E. V. Dudkin and S. G. Postupaeva, “Quality of a hard alloy and instrumental support for automated production,” Izv. Volgograd. Gos. Tekh. Univ., No. 9 (47), 72–75 (2008).
Y. I. Gordeev and A. K. Abkaryan, “Improving hard-alloy strength and tool life by thermomechanical treatment,” Russ. Eng. Res., 33, No. 10, 611–614 (2013).
A. Tyurin, S. Nagavkin, A. Malikov, and A. Orishich, “Microstructure of WC-Co hard alloy surface after laser treatment,” Surf. Eng., 31, No. 1, 74–77 (2015).
E. N. Avdeenko, E. I. Zamulaeva, A. A. Zaitsev, et al., “Structure and properties of coarse-grained WC–Co hard alloys with extra homogeneous microstructure,” Izv. VUZ. Tsvet. Metallurg., No. 4, 70–78 (2019).
V. A. Bystrov, “Efficiency of hardening of metallurgical equipment spare parts by hard alloy,” Izv. VUZ. Chern. Metallurg., 61, No. 12, 939–947 (2018).
E. V. Ageev, “Production, research and practical application of wear-resistant powder materials from waste products of tungsten-containing hard alloys,” Tekhnol. Metal., No. 9, 36–44 (2012).
E. V. Ageev, R. A. Latypov, and A. S. Ugrimov, “Metallurgical features of the manufacture of hard-alloy powders by electroerosive dispersion of a T15K6 alloy in butanol,” Russ. Metall., 50, No. 1, 1155–1157 (2016).
E. V. Ageev and R. A. Latypov, “Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes,” Russ. J. Non-Ferr. Met., 55, No. 6, 577–580 (2014).
E. V. Ageev and A. E. Ageeva, “Composition, structure and properties of hard-alloy powders obtained by electrodispersion of T5K10 alloy in water,” Metallurgist, 66, No. 1-2, 146–154 (2022).
The study was supported by the Russian Science Foundation Grant No. 22-29-00123, https://rscf.ru/project/22-29-00123/.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 67, No. 4, pp. 99–103, April, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ageev, E.V., Ageeva, E.V., Ageeva, A.E. et al. Physical and Mechanical Properties of a Tungsten-Titanium-Cobalt Alloy Produced by Spark Plasma Sintering of Hard-Alloy Electroerosive Powders Produced in Kerosene. Metallurgist 67, 526–531 (2023). https://doi.org/10.1007/s11015-023-01539-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-023-01539-8