This article discusses the prerequisites in creating an automated accounting system for compliance with the operation parameters of steel-pouring ladles and the process of its creation and analyzes the results of several years of its operation.
The factors that influenced the decision to create a system are investigated. The conditions of the system creating are considered. The composition information and operation algorithm of the system are described. The results of several years of the system operation have been summed up. Finally, the main shortcomings and directions of future development are indicated.
Similar content being viewed by others
References
A.G. Kovalenko, “Influence of metallurgical factors on the durability of the working lining of steel-pouring ladles,” Metall Lit'ye Ukrainy, No. 11/12 (282/283), 14–17 (2016).
A.A. Kondrukevich and D.V. Ryabiy, “Influence of operational factors on the durability of the lining working layer of steel-pouring ladles,” Nov. Ogneup., No. 9, 3–9 (2017).
Incident at the Oskol Electrometallurgical Plant. [Electronic resource]; https://www.oskol.dty > news > incidents (2020). Reference date 06/25/2021.
An accident at the Magnitogorsk Iron and Steel Works: Metal from a Steel Ladle Spilled onto the Work Site. [Electronic resource]; https://dostup1.ru. News agency “Dostup” (2010). Reference date 06/25/2021.
V. A. Emelyanov, “Intelligent information technology for decision support for the process of monitoring the state of steel-pouring ladles,” Nauka. Tekhnol. Proizvod., No. 3(7), Part 2, 7–9 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 65, No. 9, pp. 65–69, September, 2021. Russian DOI: https://doi.org/10.52351/00260827_2022_01_65.
Rights and permissions
About this article
Cite this article
Ponomarev, S.V. Automated Accounting System for Compliance with Operation Parameters of Steel-Pouring Ladles. Metallurgist 66, 78–83 (2022). https://doi.org/10.1007/s11015-022-01301-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-022-01301-6