We study high-cycle fatigue of tested notched specimens made of experimental low-carbon singlecrystal refractory nickel alloy depending on the crystallographic orientation and testing temperature. The anisotropy of the high-cycle fatigue limits of single crystals is insignificant. The increase in the testing temperature from 20 to 900°C leads to changes in the shape of the curve of high-cycle fatigue. By the fractographic method, we study the character of fatigue fracture.
Similar content being viewed by others
References
E. N. Kablov, “Foreword,” Aviats. Mater. Tekhnol., No. S, 11–16 (2017).
E. N. Kablov, V. V. Gerasimov, E. M. Visik, and I. M. Demonis, “Role of directed crystallization in the resource-saving technology of production of the parts of gas-turbine engines,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 3, St. 01 (2013).
E. N. Kablov, Yu. A. Bondarenko, and A. B. Echin, “Development of the technology of directed crystallization of cast high heatresistant alloys with variable controlled temperature gradient,” Aviats. Mater. Tekhnol., No. S, 24–38 (2017).
A. B. Echin and Yu. A. Bondarenko, “Specific features of the structure and properties of nickel single-crystal alloy obtained under conditions of variable temperature gradient at the front of growth,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 8, St. 01 (2015).
M. Hardy, E. Huron, et al., Superalloys 2016: Proc. of the 13th Internat. Symp. on Superalloys Edited by the TMS (Minerals, Metals & Materials Society) (2016).
N. V. Petrushin, E. M. Visik, M. A. Gorbovets, and R. M. Nazarkin, “Structural-phase characteristics and mechanical properties of single crystals of refractory nickel rhenium-containing alloys with intermetallic carbide hardening,” Metally, No. 4, 57–70 (2016).
M. S. Belyaev and M. R. Orlov, “High-cycle fatigue of single-crystal refractory nickel alloy,” Metallurg, No. 1, 74–81 (2018).
P. K. Wright, M. Jain, and D. Cameron, “High cycle fatigue in a single crystal superalloy: time dependence at elevated temperature,” Supperalloys, 657–666 (2004).
Y. Liu, J. J. Yu, Y. Xu, X. F. Sun, H. R. Guan, and Z. Q. Hu, “High-cycle behavior of a single crystal superalloy at elevated temperatures,” Mater. Sci. Eng., Ser. A, 454–455, 357–366 (2007).
E. N. Kablov, N. V. Petrushin, I. L. Svetlov, and I. M. Demonis, “Cast nickel refractory alloys of new generation,” Aviats. Mater. Tekhnol., No. S, 36–52 (2012).
O. G. Ospennikova, M. R. Orlov, and V. V. Avtaev, “Anisotropy of the elastoplastic characteristics of refractory nickel alloys as a basis for the construction of single-crystal turbine blades,” Deformats. Razrush. Mater., No. 11, 12–19 (2013).
E. N. Kablov, “Innovative designs of the FGUP ‘VIAM’ GNTs RF aimed at the realization of the ‘Strategic directions in the development of materials and technologies of their processing for the period up to 2030,” Aviats. Mater. Tekhnol., No. 1 (34), 3–33 (2015).
M. N. Stepnov and A. V. Shavrin, Statistical Methods for Processing of the Results of Mechanical Tests: A Handbook [in Russian], Mashinostroenie, Moscow (2005).
E. N. Kablov and E. R. Golubovskii, High-Temperature Strength of Nickel Alloys [in Russian], Mashinostroenie, Moscow (1998).
L. Liu, X. Gao, et al., “Vibration fatigue properties and fracture mechanism of DD6 single crystal superalloy,” J. Mater. Eng., 46,No. 2, 128–133 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 63, No. 11, pp. 84–91, November, 2019. Original article July 10, 2019.
Rights and permissions
About this article
Cite this article
Belyaev, M.S., Morozova, L.V., Gorbovets, M.A. et al. High-Cycle Fatigue of Single-Crystal Heat-Resistant Nickel Alloy under the Conditions of Stress Concentration. Metallurgist 63, 1237–1247 (2020). https://doi.org/10.1007/s11015-020-00946-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-020-00946-5