The problem of achieving a higher level of ductility of pipe steels of strength grades K60 (X70) and K65 (X80) is described. Results of laboratory and industrial experiments are shown, and requirements for pipe microstructure with improved deformation capacity are formulated. Technology is described providing the specified type of structure and steel target mechanical properties, and different production schemes for LTCC are applied making it possible to achieve the prescribed strength and ductility properties over a wide variation range. Results are provided for mass industrial production of rolled product and pipe with high deformation capacity.
Similar content being viewed by others
References
M. Yu. Matrosov, A. A. Kichkina, S. V. Golovin, L. I. Éfron, D. A. Ringinen, E. V. Shul’ga, and V. I. Il’inskii, “Control of pipe steel structure and properties alloyed with chromium during cooling after thermomechanical treatment,” Metallurg., No. 7, 36–44 (2019).
S. Endo and N. Nakata, “Thermo-mechanical control process (TMCP) and high performance steel in JFE steel,” JFE Technical Report, No. 20, March (2015).
T. Hara, Y. Shinohara, Y. Terada, H. Asahi, and N. Doi, “Metallurgical design and development of high deformable high strength line pipe suitable for strain-based design,” International Offshore and Polar Engineering Conference, Osaka, Japan, June 21–26 (2009).
Junji Shimamura, Nobuyuki Ishikawa, Shigeru Endo, Hiroyuki Fukuda, Ryuji Muraoka, Kimihiro Nishimura, “Development of heavy wall X70 high strain linepipe steel,” Proceedings of the Twenty-third (2013) International Offshore and Polar Engineering Anchorage, Alaska, USA, June 30–July 5 (2013).
V. I. Il’inskii, S. V. Golovin, P. P. Stepanov, D. A. Ringinen, A. V. Chastukhin, L. I. Éfron, and A. A. Kichkkina, “Development of production technology in a 5000mill of rolled product for pipeline projects with extreme parameters,” Metallurg, No. 8, 57–67 (2017).
N. Kazakbaev, V. Ilinskii, W. Spies, T. Koch, R. Mackenbach, I. Schuster, J. Lemke, and J. Breidenstein, “Advanced strategies for plate production shown through the example of a 5 m heavy plate mill,” The Association for Iron & Steel Technology Conference, Pittsburg, USA. May 16–19 (2016).
M. Yu. Matrosov, I. V. Lyasotskii, A. A. Kichkina, A. A. D’yakonov, and A. A. Efimov, “Features and classification low-carbon, low-alloy, high strength pipe steels structures,” Stal’, No. 1, 65–74 (2012).
A. A. Kichkina, M. Yu. Matrosov, L. I. Éfron, D. V. Ringinen, I. V. Lyasotskii, E. V. Shul’ga, and A. A. Efimov, “M/A-constituent in structure of high-strength low-carbon bainitic steel. Part. 1,” Metallurg, No. 8, 44–52 (2017).
S. A. Golovanenko and N. M. Fonshtein, Two-Phase Low-Alloy Steels [in Russian], Metallurgiya, Moscow (1976).
D. A. Ringinen, S. V. Golovin, L. I. Éfron, O.A. Bagmet, V. I. Il’inskii, and A. V. Chervonnyi, RF Patent 2654121, Production of thin rolled sheet with improved deformation capacity, thick rolled sheet. Publ. 05.16.2018, Bull. No. 14.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Metallurg, Vol. 63, No. 11, pp. 61–71, November, 2019.
Rights and permissions
About this article
Cite this article
Barykov, A.M., Stepanov, P.P., Il’inskii, V.I. et al. Development of Rolled Product Manufacturing Technology for Pipes with High Deformation Capacity. Metallurgist 63, 1204–1219 (2020). https://doi.org/10.1007/s11015-020-00943-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-020-00943-8