The VNIIMETMASh’s developments for import substitution of electromagnetic stirring equipment in the mold of billet and bloom continuous casters to improve the quality of rolled steel are reviewed.
Similar content being viewed by others
References
D. P. Evteev and I. N. Kolybalov, Continuous Casting of Steel [in Russian], Metallurgiya, Moscow (1984).
F. N. Tavadze, M. Ya. Brovman, Sh. D. Ramishvili, et al., Trends in the Development of Modern Continuous Casting Machines [in Russian], Metsniereba, Tbilisi (1975).
B. A. Efimov and A. S. Eldarkhanov, Modern Metallurgy Technologies [in Russian], Novye Tekhnologii, Moscow (2004).
R. S. Aizatulov, A. G. Kuz’menko, V. G. Grachev, et al., Electromagnetic Stirring of Melted Steel in Metallurgy [in Russian], Metallurgiya, Moscow (1996).
А. Sgro, M. Rinaldi, and A. Giovanni, “A new benchmark in special steel casting: new twin-strand vertical caster AT Posco specialty steel, Korea,” Millennium Steel, 82–87 (2014).
A. N. Grundy, M. Yeke, and S. Feldhaus, “Design and first operational results from 5 strand billet, bloom and beam blank combicaster at Kardemir, Turkey,” in: Proc. 8th European Continuous Casting Conf., Graz, Austria, June 23–26 (2014), pp. 406–415.
R. Stransky, F. Kavicka, B. Sekanina, and J. Stetina, “The effect of electromagnetic stirring on the crystallization of CONCAST billets,” Materials and Technology, No. 45 (2), 163–166 (2011).
X. Geng, X. Li, F. B. Liu, H. B. Li, and Z. H. Jiang, “Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring,” Ironmaking & Steelmaking,42, No. 9, 1–8 (2015).
G. Cabai, F. Cabai, and M. Bellina, “STS bloom caster for special steels,” Millenium Steel, 79–85 (2015).
Q. Fang, H. Ni, and B. Wang, “Effects of EMS induced flow on solidification and solute transport in bloom mold,” Metals,7, No. 72, 1–19 (2017).
L. Morsut, M. Rinaldi, A. Urbano, and L. Marco, “Rail steel production at Evraz ZSMK with MSR,” in: Proc. 8th European Continuous Casting Conf., Graz, Austria, June 23–26 (2014), pp. 416–425.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 63, No. 9, pp. 33–36, September, 2019.
Rights and permissions
About this article
Cite this article
Sivak, B.A., Shakhov, S.I., Vdovin, K.N. et al. Development of a System for Electromagnetic Stirring of Liquid Steel in Molds of Billet and Bloom CCMS. Metallurgist 63, 910–914 (2020). https://doi.org/10.1007/s11015-020-00909-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-020-00909-w