Directions of Improving Gas and Oil Pipeline Structural Materials
- 61 Downloads
Achievements are considered for contemporary metallurgy and metal science in improving quality and operating properties, and also trends in the development of low alloy steels for oil and gas pipelines. The possibility is analyzed for using ultralow-alloy austenitic martensitic steels as promising structural materials for seamless pipes and connections for main pipelines. The most essential parameters for composition and technology affecting a set of steel mechanical properties with a low-carbon microstructure are revealed.
Keywordslow-alloy steel strength toughness cold resistance ultralow-carbon martensitic steel fittings
This study was supported by the Russian Foundation for Basic Research (Project No. 16-08-00760).
- 1.I. P. Shabalov, Yu. D. Morozov, and l. I. Efron, Steels for Pipes and Building Structures with Improved Operating Properties, Metallurgizdat, Moscow (2003).Google Scholar
- 2.A. J. DeArdo, “Modern thermomechanical processing of micro аlloyed steel: a physical metallurgy perspective,” Proc. Microalloying’95 Conf., Pittsburgh, PA. June 11–14, 1995, The Iron and Steel Society, pp. 15–33.Google Scholar
- 3.S. U. Nastich, “Features of ferritic-bainitic microstructure and ductile failure resistance of high-strength pipe steel,” Deform. Razrush. Mater., No. 7, 19–25 (2012).Google Scholar
- 4.Yu. D. Morozov, A. A. Naumenko, and I. V. Lyasottskii, “Effect of thermal deformation rolling regimes and accelerated cooling on formation of rolled sheet mechanical properties in steel of strength class X80,” Metallurg, No. 10, 57–62 (2010).Google Scholar
- 5.M. M. Kleiner and A. A. Shatsov, Structural High-Strength Low-Carbon Steels of the Martensitic Class, PGTU, Perm (2008).Google Scholar
- 6.S. M. Glazkova, E. I. Gontaruk, L. M. Kleiner, et al., “Approval of manufacturing technology for pump compressor pipes of steel 08Kh2G2FA melted on the basis of metallized pellets,” Metallurg, No. 3, 35–37 (2000).Google Scholar
- 7.O. N. Chevskaya, M. V. Antonov, A. A. Kichkina, et al., “Effect of hot deformation on the structure and properties of low-carbon martensitic steels,” Probl. Chern. Met. Materialoved., No. 4, 58–64 (2014).Google Scholar
- 8.P. G. Martynov, I. A. Simbukhov, and Yu. D Morozov, “Study of pipe steels of strength categories X100–X120 for main gas pipelines,” Probl. Chern. Met. Materialoved., No. 3, 66–70 (2012).Google Scholar
- 9.Sh. Ogibayashi, “Advances in technology of oxide metallurgy,” Nippon Steel Techn. Rep., No. 61, 70–76 (1994).Google Scholar
- 10.L. M. Kleiner and Yu. M. Simonov, “Structure and properties of low-carbon martensitic steels,” MiTOM, No. 8, 46–48 (1999).Google Scholar
- 11.V. M. Mishin and G. A. Filippov, Physics of Steel Slow Failure, Poligrafprom, Minvody (2013).Google Scholar