Contemporary methods for silumin preparation are reviewed. Prospects of preparing silumin using amorphous silica are connected, first, with a high yield of silicon production waste; second, with a return for their industrial use; and, third, with deterioration of the ecological situation adjacent to slurry field of the territory. A thermodynamic possibility is established for reducing silicon dioxide in molten aluminum. Different methods are studied for adding SiO2 particles into molten aluminum. It is determined that the most effective method is exhibited by adding particle to melt in a semisolid state.
Similar content being viewed by others
References
A. R. Luts and I. A. Galochkina, Aluminum Composite Alloys – Alloys of the Future, Samar. Tekhn. Univ., Samara (2013).
V. M. Beletskii and G. A. Krivov, Aluminum Alloys. Composition, Properties, Technology, Applications: Handbook, Komintekh, Kiev (2005).
N. A. Belov, Phase Composition of Aluminum Alloys, ID MISiS, Moscow (2009).
A. R. Luts, Resource Saving Methods for Synthesizing Silumins Using Quartz-Containing Materials, Scrap, and Aluminum Alloy Waste: Dissert. Cand. Tekhn. Sci., Samara (2006).
V. V. Kondrat’ev, et al., Theory and Practice of Flotation Enrichment of Nanosize Materials, Izd. IRNITU, Irkutsk (2015).
A. V. Arabei and I. V. Rafal’skii, “Synthesis of aluminum-silicon alloys by direct reduction of silicon using an aluminum matrix composite master alloy,” Lit. Metally, No. 3 (61), 19–25 (2011).
N. K. Tolochko et al., Contemporary Casting Technology: Monograph, BGATU, Minsk (2009).
A. A. Nemalov, A. E. Rzhechitskii, N. A. Ivanov, et al., Patent 2500480 RF, IPC B03D 1/02, “Method for extracting nanosize particles of technogenic flotation production waste,” subm. 02.20.2012, publ. 12.10.2013.
V. V. Kondrat’ev, A. I. Karlina, A. A. Nemarov, and N. N. Ivanov, “Results of theoretical and practical study of flotation for nanosize silicon-containing structures,” Zh. Sib. Fed. Univ., Ser. Tekhn. Tekhnol., 9, No. 5, 657–670 (2016).
A. R. Robie and B. S. Hemingway, Thermodynamic Properties of Minerals and Related Substances at 298.15K and 1 bar (105 Рascals) Pressure and at Higher Temperatures, Gov. Print. Office, Washington, US (1995).
R. Ailer, Silica Chemistry [Russian translation], Mir, Moscow (1982).
V. A. Ryabin, M. A. Ostroumov, and T. F. Svit, Thermodynamic Properties of Substances: Handbook, Khimiya, Leningrad (1977).
A. A. Ravdel’ and A. M. Ponomarev (eds.), Short Handbook of Physicochemical Values, Ivan Fedorov, St. Petersburg (2003).
M. P. Kuz’min, Study and Improvement of Crystallization Refining of Industrial Aluminum: Diss. Cand. Tekchn. Sci., IRNITU, Irkutsk (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 1, pp. 101–105, January, 2017.
Rights and permissions
About this article
Cite this article
Kuz’min, M.P., Kondrat’ev, V.V., Larionov, L.M. et al. Possibility of Preparing Alloys of the Al–Si System Using Amorphous Microsilica. Metallurgist 61, 86–91 (2017). https://doi.org/10.1007/s11015-017-0458-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-017-0458-0