The bearing assemblies of the work rolls of high-speed cold-rolling mills are the most heavily loaded components of the working stands. The short service life of the rolling bearings is due to overheating. It is shown that it is possible to eliminate this disadvantage of rolling bearings either by providing, based on the developed thermal model, the appropriate oil-feed cycle in the oil–air lubrication system or by selecting, using the proposed method, the viscosity grade of the mineral oil that minimizes the temperature of the lubricating film in the contact zone.
Similar content being viewed by others
References
N. L. Sultanov, Yu. V. Zhirkin, and M. S. Shlenkina, “Studying the reliability of the rolling bearings of the ММК’s 2000 tandem cold-rolling mill,” Vestn. MGTU im. Nosova, 53–55 (2014).
D. S. Kodnir, E. P. Zhil’nikov, and Yu. I. Baiborodov, Elastohydrodynamic Design of Machine Parts, Mashinostroenie, Moscow (1988).
I. M. Yachikov, Yu. V. Zhirkin, E. I. Mironenkov, and N. L. Sultanov, “Mathematical simulation of the thermal state of the bearing assembly of the working rolls of the ММК’s 2000 cold-rolling mill,” Mat. Progr. Obespech. Sistem Prom. Sots. Sferakh, No. 1 (4), 29–36 (2014).
N. L. Sultanov, E. I. Mironenkov, and Yu. V. Zhirkin, “Control of the thermal state of the bearing assemblies of the ММК’s a 2000 tandem cold-rolling mill,” Stal, No. 4, 71–73 (2014).
E. A. Puzik, Yu. V. Zhirkin, and A. A. Filatov, “Prolonging the service life of the bearing assemblies of four-high rolling stands during maintenance,” Vest. MGTU im. Nosova, No. 3 (51), 83–88 (2015).
Yu. V. Zhirkin and E. A. Puzik, “An algorithm for selecting an oil for lubricating the bearing assemblies of work rolls of four-high rolling stands,” Mech. Equipm. Met. Plants, No. 1 (4), 55–61, Izd. MGTU im. Nosova, Magnitogorsk (2015).
Yu. V. Zhirkin and E. A. Puzik, Patent 159511 RF, IPC GO1М13/04, “A stand for determining the viscosity of a lubricant,” subm. 07.21.2015, publ. 01.22.2016, Byull., No. 4.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 11, November, 2016, pp. 71–73.
Rights and permissions
About this article
Cite this article
Zhirkin, Y.V., Puzik, E.A., Filatov, A.A. et al. Prolonging the Service Life of the Rolling Bearings of the Work Rolls of the 2000 Tandem Cold-Rolling Mill at the Magnitogorsk Metallurgical Combine. Metallurgist 60, 1180–1182 (2017). https://doi.org/10.1007/s11015-017-0425-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-017-0425-9