Use of Corrosion-Resistant Steels Alloyed with Nitrogen as a Bimetal Cladding Layer Prepared by Explosion Welding
- 36 Downloads
Research results are used to confirm the compatibility of workable chromium martensitic steels alloyed with nitrogen for a cladding layer and low-alloy steels as the base layer in producing two-layer sheets by explosion welding. Satisfactory results are obtained in bend tests for bimetal steel samples that together with the results of metallographic analysis and ultrasonic testing confirm the workability of the martensitic steels developed and alloyed with nitrogen for preparing two-layer steels by explosion welding.
Keywordsbimetal explosion welding stainless steel alloying with nitrogen nitrogen atmosphere
This work was carried out within the scope of Subsidy Agreement No. 14.624.21.0001 of 08.11.2014; unique project identifier is RFMEFI62414X0001.
- 1.A. A. Deribas, Physics of Strengthening and Welding by Explosion, Nauka, Novosibirsk (1980).Google Scholar
- 2.Yu. A. Konon, L. B. Pervukhin, and A. D. Chudnovskii, Explosion Welding, V. M. Kudinov (ed.), Mashinostroenie, Moscow (1987).Google Scholar
- 3.I. D. Zakharenko, Metal Explosion Welding, Nauka i Tekhnika, Moscow (1990).Google Scholar
- 4.V. I. Lysak and S. V. Kuz’min, Explosion Welding, Mashinostroenie, Moscow (2005).Google Scholar
- 5.L. B. Pervukhin, D. V. Rikhter, O. L. Pervukhina, et al., “Continuity defect formation during production of two-layer large sheets by explosion welding and their connection with processes occurring in the welding gap ahead of contact points,” Svar. Proizvod., No. 7, 32–37 (2009).Google Scholar