Problems are considered for choice of properties for evaluating sinter quality, and also choice of structure and creation of a simulation model for calculating mechanical cold (tumble) strength index using a selection of models describing the effect of individual features of the process.
Similar content being viewed by others
References
E. Donskoi, J. R. Manuel, J. M. F. Clout, and Y. Zhang, “Mathematical modelling and optimization of iron ore sinter properties,” Proc. of 4th Int. Conf. on Mathematical Modelling and Computer Simulation of Material Technologies – MMT-2006, College of Judea and Samaria, Ariel, Israel, September 11–15, 2006.
V. I. Korotich, Yu. A. Frolov, and G. N. Bezdezhkii, Ore Material Sintering [in Russian], UGTU-UPI, Ekaterinburg (2003).
M. K. Kalenga and A. M. Garbers-Craig, “Investigation into how the magnesia, silica, and alumina contents of iron ore sinter influence, its mineralogy and properties,” J. South. African Inst. of Mining and Metallurgy, 110, August, 447–456 (2010).
D. V. Lupanov, G. N. Popov, S. V. Kuberskii, et. al., “Study of sintering using different forms of fluxes in charges,” Coll. Sci. Works, Donbass. State. Techn. Univ (2008), Iss. 27.
N. R. Mansurova, “Effect of charge genesis and basicity on mineralogical composition and metallurgical sinter properties,” Diss. Cand. Tech. Sci.: 05.16.02, Moscow (2007).
Hsieh Li-Heng, “Effect of Raw Material Composition on the Sintering Properties,” ISIJ Int., 45, No. 4, 555–559 (2005).
L. Lu, R. J. Holmes, and J. R. Manuel, “Effects of alumina on sintering performance of hematite iron ores,” ISIJ Int., 47, No. 3, 349–358 (2007).
D. V. Karymov, G. V. Gubin, and L. N. Saitgareev, “Effect of solid fuel consumption on sintering indices for hematite and magnetite concentrate mixtures,” Visnik KTU, No. 27, 149–151 (2011).
V. I. Klein, E. M. Maizel, Yu. G. Yaroshenko, and A. A. Avdeenko, Heat Engineering Methods of Analysis for Sintering [in Russian], UGTU-UPI, Ekaterinburg (2004).
Z. K. Kabakov, A. A. Eliseev, and Yu. V. Veselov, “Mathematical model of heat- and mass-transfer during charge sintering,” Izv. Vyssh. Uchebn. Zaved. Chern. Met., No. 1, 19–22 (2008).
G. V. Gubin and S. G. Sabel’ev, “Analysis of sintering intensity on sinter strength,” Met. Gorn. Prom., No. 4, 13–16 (2011).
E. N. Ishmet’ev, Z. G. Salikhov, A. D. Sokolov, et al., RF Patent 2373527, IPC G01N27/00, Automatic Complex for Continuous Monitoring of Moving Metal-Containing Mixture Chemical Composition and Quality, subm. 04.23.2008, publ. 11.20.2009, Byull., No. 32.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 4, pp. 40–47, April, 2013.
Rights and permissions
About this article
Cite this article
Ryabchikov, M.Y., Grebennikova, V.V. Simulation of the combined effect of production factors on metallurgical sinter mechanical strength. Metallurgist 57, 274–283 (2013). https://doi.org/10.1007/s11015-013-9724-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-013-9724-y