The parameters of ferroalloy furnaces with different electrode spacings are examined. The variants that are discussed for modernizing standard ferroalloy furnaces having the traditional spacing entail increasing the spacing to improve the technical-economic and energy characteristics of the furnace.
Similar content being viewed by others
References
A. P. Shkirmontov, “Theoretical foundations of the energy-engineering parameters for smelting ferrosilicon with increases in electrode spacing and the distance from the electrodes to the bath,” Metallurg, No. 6, 68–72 (2009).
A. P. Shkirmontov, “Energy-engineering parameters in the industrial smelting of ferrosilicon with an increase in the distance from the electrodes to the bath and the distance of the electrodes from one another,” Metallurg, No. 10, 64–67 (2009).
V. G. Mizin, I. M. Vershitskii, A. V. Kononenko, et al., “Improving the operating characteristics of an RKO-16.5 furnace in the production of 65% ferrosilicon,” Stal, No. 10, 34–37 (2004).
A. P. Shkirmontov, “Calculation of the parameters of an electric ferrosilicon furnace with a larger-than-normal electrode spacing by using the reconstruction of a standard furnace as an example,” Elektrooborud.: Ekspluat. Remont, No. 4, 65–68 (2010).
Ya. B. Dantsis, L. D. Katsevich, G. M. Zhilov, et al., Short Circuits and the Electrical Parameters of Arc Furnaces [in Russian], Metallurgiya, Moscow (1987).
B. M. Strunskii, Designs of Ore-Roasting Furnaces [in Russian], Metallurgiya, Moscow (1982).
A. S. Mikulinskii, Determination of the Parameters of Ore-Roasting Furnaces Based on Similarity Theory [in Russian], Energiya, Moscow–Leningrad (1964).
A. P. Shkirmontov, “Performance criterion of an ore-roasting furnace used for ferroalloys production as a factor in evaluating energy conservation,” in: The Renewal of Metallurgy: Proc.: 3rd Int. Conf. Metallurgiya-INTEKhEKO, March 30–31, 2010, INTEKhEKO, Moscow (2010), pp. 18–20.
A. P. Shkirmontov, “Determination of a set of parameters for obtaining an energy-engineering criterion to evaluate the performance of an electric ferroalloys furnace,” Glavnyi Energetik, No. 5, 44–50 (2010).
B. I. Emlin and M. I. Gasik, Handbook of Electrothermal Processes [in Russian], Metallurgiya, Moscow (1978).
Author information
Authors and Affiliations
Corresponding author
Additional information
Continuation of an article begun in issue No. 10 of Metallurgist for 2009.
Translated from Metallurg, No. 4, pp. 61–64, April, 2011.
Rights and permissions
About this article
Cite this article
Shkirmontov, A.P. Comparison of the parameters of ferrosilicon-smelting furnaces with different electrode spacings. Metallurgist 55, 266 (2011). https://doi.org/10.1007/s11015-011-9422-6
Received:
Published:
DOI: https://doi.org/10.1007/s11015-011-9422-6