Advertisement

Metallurgist

, Volume 51, Issue 7–8, pp 401–404 | Cite as

Calculating the detonation parameters of mixtures of hexogen and inert additives

  • I. V. Babaitsev
  • N. V. Kozak
  • F. V. Antipova
Article
  • 27 Downloads

Abstract

Methods have been developed to calculate the detonation parameters of mixtures of hexogen with inert additions and evaluate their reliability. It is shown that it is possible to obtain explosives with unique properties — explosives that can undergo detonation but not burn and then detonate. That in turn eliminates the chance of accidental explosions during their use.

Keywords

Explosive Sodium Chloride Lead Nitrate Unit Density Ultrahigh Pressure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    I. V. Babaitsev, Yu. N. Panarin, and V. F. Tyshevich, “Detonation of explosives containing an inert filler,” in: Failures of Detonation in Open-Pit Mines [in Russian], Naukova Dumka, Kiev (1972).Google Scholar
  2. 2.
    V. D. Lyutov, I. M. Voskoboinikov, A. N. Afanasenkov, and A. Ya. Apin, “Evaluating the detonation pressure of explosives containing an inert addition,” Vzryv. Delo, No. 63/20 (1967).Google Scholar
  3. 3.
    N. N. Kuznetsov and K. K. Shvedov, “Equations of state of hexogen detonation products,” Fiz. Gor. Vzryva, No. 4, 85–96 (1966).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2007

Authors and Affiliations

  • I. V. Babaitsev
    • 1
  • N. V. Kozak
    • 1
  • F. V. Antipova
    • 1
  1. 1.Moscow Institute of Steel and Alloys (Engineering University)Russia

Personalised recommendations