Skip to main content
Log in

New analytical solutions for modified polarization saturation models in piezoelectric materials

  • Published:
Meccanica Aims and scope Submit manuscript

Abstract

In this paper, we present new analytical solutions for modified polarization saturation (PS) models for arbitrary polarized and semipermeable 2-D piezoelectric media. The PS model is modified to various other non-linear fracture models by varying the normal electric displacement saturated conditions in place of a constant saturated value. These variations are hereby defined as interpolating linear, quadratic and cubic type’s polynomials into saturated value interpolated on the basis of possible electric displacement values at the centre of the crack, actual crack tip and saturated zone tip. To present the analytical study, a centre crack problem in 2-D semipermeable piezoelectric media under arbitrary poling direction and combined in-plane mechanical and electric displacement loadings is considered. Using extended Stroh formalism and complex variable approach, these models are mathematically reduced into generalized non-homogeneous Riemann–Hilbert problems. Applying Riemann–Hilbert technique, the solution of these problems is obtained in terms of generalized complex potential functions representing traction forces and electric displacement components. These lead to obtain the explicit expressions for saturated zone length, crack opening displacement, crack opening potential and local intensity factor in each case. Also, the results of saturation zones and local intensity factor are obtained in each case and compared with the established numerical results. The studies show that saturated zone length increases with increasing electric loading for each case and also depends on the polynomial varying saturation condition. For a particular electric loading applied within the range of critical value, it increases with increasing degree of polynomial type saturated condition i.e. from constant to cubic type’s normal electric displacement saturated condition.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. Collins RA, Cartwright DJ (2001) An analytical solution for two equal-length collinear strip yield cracks. Eng Fract Mech 68:915–924

    Google Scholar 

  2. Parton VZ (1976) Fracture mechanics of piezoelectric materials. Acta Astron 3:671–683

    MATH  Google Scholar 

  3. Pak YE (1992) Linear electro-elastic fracture mechanics of piezoelectric materials. Int J Fract 54:79–100

    Google Scholar 

  4. Suo Z, Kuo CM, Barnett DM, Wills JR (1992) Fracture mechanics of piezoelectric ceramics. J Mech Phys Solids 40:739–765

    ADS  MathSciNet  MATH  Google Scholar 

  5. Park SB, Sun CT (2006) Effect of electric field on fracture of piezoelectric ceramics. Int J Fract 70:203–216

    Google Scholar 

  6. Xu XL, Rajapakse RKND (2001) On a plane crack in piezoelectric solids. Int J Solids Struct 38:7643–7658

    MATH  Google Scholar 

  7. Gao H, Zhang TY, Tong P (1997) Local and global energy release rate for an electrically yielded crack in a piezoelectric ceramic. J Mech Phys Solids 45(4):491–510

    ADS  Google Scholar 

  8. Ru CQ (1999) Effect of electrical polarization saturation on stress intensity factors in a piezoelectric ceramic. Int J Solids Struct 36:869–883

    MATH  Google Scholar 

  9. Gao CF, Zhang TY (2004) Fracture behaviors of piezoelectric materials. Theor Appl Fract Mech 41:339–379

    Google Scholar 

  10. Zhang TY, Zhao MH, Gao CF (2005) The strip dielectric breakdown model. Int J Fract 132:311–327

    MATH  Google Scholar 

  11. Fan CY, Zhao YF, Zhao MH, Pan E (2012) Analytical solution of a semi-permeable crack in a 2D piezoelectric medium based on the PS model. Mech Res Commun 40:34–40

    Google Scholar 

  12. Bhargava RR, Jangid K (2013) Strip-saturation model for piezoelectric plane weakened by two collinear cracks with coalesced interior zones. Appl Math Model 37:4093–4102

    MathSciNet  MATH  Google Scholar 

  13. Singh S, Sharma K, Bhargava RR (2017) Complex variable approach in studying modified polarization saturation model in two-dimensional semipermeable piezoelectric media. Appl Math Mech 38:1517–1532

    MathSciNet  MATH  Google Scholar 

  14. Narita F, Shindo Y (2001) Mode-I crack growth rate for yield strip model of a narrow piezoelectric ceramic body. Theor Appl Fract Mech 36:73–85

    Google Scholar 

  15. Lin S, Narita F, Shindo Y (2003) Electroelastic analysis of a penny shaped crack in a piezoelectric ceramic under mode-I loading. Mech Res Commun 30:371–386

    MATH  Google Scholar 

  16. Qin QH (2003) Fracture analysis of cracked thermopiezoelectric materials by BEM. Electron J Bound Elem 1:283–301

    MathSciNet  Google Scholar 

  17. Kuna M (2006) Finite element analyses of cracks in piezoelectric structures: a survey. Arch Appl Mech 76:725–745

    MATH  Google Scholar 

  18. Bhargava RR, Sharma K (2012) X-FEM simulation for two-unequal-collinear cracks in 2-D finite piezoelectric specimen. Int J Mech Mater Design 8:129–148

    Google Scholar 

  19. Sharma K, Bui TQ, Zhang Ch, Bhargava RR (2013) Analysis of subinterface crack in piezoelectric bimaterials with the extended finite element method. Eng Fract Mech 104:114–139

    Google Scholar 

  20. Li C, Man H, Song C, Gao W (2013) Fracture analysis of piezoelectric materials using the scaled boundary finite element method. Eng Fract Mech 97:52–71

    Google Scholar 

  21. Sharma K, Bui TQ, Singh S (2017) Numerical distributed dislocation modeling of multiple cracks in piezoelectric media considering different crack-face boundary conditions and finite size effects. Strength Fract Complex 10:49–72

    Google Scholar 

  22. Sharma K, Bui TQ, Bhargava RR, Yu T, Lei J, Hirose S (2016) Numerical studies of an array of equidistant semi-permeable inclined cracks in 2-D piezoelectric strip using distributed dislocation method. Int J Solids Struct 80:137–145

    Google Scholar 

  23. Dai M, Schiavone P, Gao CF (2016) An anisotropic piezoelectric half-plane containing an elliptical hole or crack subjected to uniform in-plane electromechanical loading. J Mech Mater Struct 11(4):433–448

    MathSciNet  Google Scholar 

  24. Li M, Gao CF (2018) Electro-elastic fields in an elliptic piezoelectric plane with an elliptic hole or a crack of arbitrary location. Meccanica 53(1–2):347–357

    MathSciNet  MATH  Google Scholar 

  25. Jangid K, Bhargava RR (2017) Complex variable-based analysis for two semi-permeable collinear cracks in a piezoelectromagnetic media. Mech Adv Mater Struct 24(12):1007–1016

    Google Scholar 

  26. Govorukha V, Sheveleva A, Kamlah M (2019) A crack along a part of an interface electrode in a piezoelectric bimaterial under anti-plane mechanical and in-plane electric loadings. Acta Mech. https://doi.org/10.1007/s00707-019-2364-y

    Article  MathSciNet  Google Scholar 

  27. Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8:100–104

    ADS  Google Scholar 

  28. Loboda V, Laputsa Y, Govorukha V (2008) Mechanical and electrical yielding for an electrically insulated crack in an interlayer between piezoelectric materials. Int J Eng Sci 46:260–272

    MATH  Google Scholar 

  29. Fan CY, Zhao MH, Zhou YH (2009) Numerical solution of polarization saturation/dielectric breakdown model in 2D finite piezoelectric media. J Mech Phys Solids 57:1527–1544

    ADS  MATH  Google Scholar 

  30. Loboda V, Laputsa Y, Sheveleva A (2010) Limited permeable crack in an interlayer between piezoelectric materials with different zones of electrical saturation and mechanical yielding. Int J Solids Struct 47:1795–1806

    MATH  Google Scholar 

  31. Linder C, Miehe C (2012) Effect of electric displacement saturation on the hysteretic behavior of ferroelectric ceramics and the initiation and propagation of cracks in piezoelectric ceramics. J Mech Phys Solids 60(5):882–903

    ADS  MathSciNet  Google Scholar 

  32. Chen HS, Pei YM, Liu JX, Fang DN (2013) Moving polarization saturation crack in ferroelectric solids. Eur J Mech/A Solids 41:43–49

    MathSciNet  MATH  Google Scholar 

  33. Bhargava RR, Hasan S (2011) Crack opening displacement for two unequal straight cracks with coalesced plastic zones—a modified Dugdale model. Appl Math Model 35:3788–3796

    MathSciNet  MATH  Google Scholar 

  34. Harrop LP (1978) Application of modified Dugdale model to the K vs COD relation. Eng Fract Mech 10:807–816

    Google Scholar 

  35. Theocaris PS, Gdoutos EE (1974) The modified Dugdale–Barenblatt model adapted to various configurations in metals. Int J Fract 10:549–564

    Google Scholar 

  36. Lu TJ, Chow CL (1990) A modified Dugdale model for crack tip plasticity and its related problems. Eng Fract Mech 37:551–568

    Google Scholar 

  37. Bhargava RR, Bansal PK (2002) Crack arrest model for a plate weakened by internal and external cracks—a modified Dugdale approach. Mech Compos Mater 38:429–434

    ADS  Google Scholar 

  38. Hasan S, Akhtar N (2015) Dugdale model for three equal collinear straight cracks: an analytical approach. Theor Appl Fract Mech 78:40–50

    Google Scholar 

  39. Hasan S (2016) Application of modified Dugdale model to two pairs of collinear cracks with coalesced yield zones. Appl Math Model 40:3381–3399

    MathSciNet  Google Scholar 

  40. Sharma K, Singh S (2018) Numerical studies of some modified polarization saturation models in 2-D semipermeable piezoelectric media. Proc Int Conf ACOME 2017:79–94

    Google Scholar 

  41. Hao TH, Shen ZY (1994) A new electric boundary condition of electric fracture mechanics and its applications. Eng Fract Mech 47:793–802

    Google Scholar 

  42. Muskhelishvili NI (1975) Some basic problems of mathematical theory of elasticity. Noordhoff, Leyden

    MATH  Google Scholar 

  43. Rojas-Díaz R, Denda M, García-Sánchez F, Sáez A (2012) Dual BEM analysis of different crack face boundary conditions in 2D magnetoelectroelastic solids. Eur J Mech A/Solids 31:152–162

    MathSciNet  MATH  Google Scholar 

  44. Jangid K, Bhargava RR, Verma PR (2015) Two semi-permeable equal collinear cracks weakening a piezoelectric plate—a study using complex variable technique. ZAMM Z Angew Math Mech 95(1):66–76

    MathSciNet  MATH  Google Scholar 

Download references

Funding

This study was not funded by any agency.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Kuldeep Sharma or Tinh Quoc Bui.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Singh, S., Sharma, K. & Bui, T.Q. New analytical solutions for modified polarization saturation models in piezoelectric materials. Meccanica 54, 2443–2459 (2019). https://doi.org/10.1007/s11012-019-01084-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11012-019-01084-2

Keywords

Navigation