Skip to main content
SpringerLink
Log in

A magneto-rheological elastomer vibration isolator for lightweight structures

  • Published:
Meccanica Aims and scope Submit manuscript

Abstract

Magneto-rheological elastomers (MRE), consisting of elastomeric matrix containing ferromagnetic particles, are a kind of smart material, whose mechanical properties are controllable via applied magnetic fields. In this paper, the possibility of adopting these materials to realize vibration isolators for lightweight structures is evaluated. Such isolators must be stiff enough in the vertical direction, to support the structure weight, while they must have a low horizontal stiffness to isolate ground vibrations originated by different sources. To meet these requirements, an isolation system, constituted by MRE pads and ball transfer units (BTU), is proposed. The BTUs support the structure weight allowing it to move in any horizontal direction, while the MRE pads provide a controllable horizontal restoring force. Therefore, the pad stiffness may be chosen considering only the horizontal isolation characteristics, regardless of the vertical ones. The paper describes the isolator layout, the criteria followed to make up a set of MRE specimens and the experimental set-up adopted to characterize them. The dynamic behaviour of the isolated structure and the isolator performances are described by means of numerical simulations. The analytical description of the isolator restoring force was deduced adopting a generalized Maxwell model in parallel with a Bouc–Wen element whose coefficients were identified from the experimental test results.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
Fig. 29
Fig. 30
Fig. 31
Fig. 32
Fig. 33
Fig. 34

Similar content being viewed by others

References

  1. Kelly JM (1986) A seismic base isolation: review and bibliography. Soil Dyn Earthq Eng 5(4):202–216

    Article  Google Scholar 

  2. Calabrese A, Serino G, Strano S, Terzo M (2015) Experimental investigation of a low-cost elastomeric anti-seismic device using recycled rubber. Meccanica 50(9):2201–2218

    Article  Google Scholar 

  3. Balaji PS, Rahman ME, Moussa L, Lau HH (2015) Wire rope isolators for vibration isolation of equipment and structures: a review. IOP Conf Ser Mater Sci Eng 78:012001

    Article  Google Scholar 

  4. De Michele M, Di Massa G, Frisella G, Lippolis S, Pagano S, Pisani G, Strano S (2017) A smart system for shock and vibration isolation of sensitive electronic devices on-board a vehicle. In: Advances in Italian mechanism science. Springer, pp 503–511. ISBN: 978-3-319-48375-7

  5. Franklin YC, Hongping J, Kangyu L (2008) Smart structures: innovative systems for seismic response control. CRC Press, Boca Raton

    Google Scholar 

  6. Yao GZ, Yap FF, Chen G, Li WH, Yeo SH (2002) MR damper and its application for semi-active control of vehicle suspension system. Mechatronics 12(7):963–973

    Article  Google Scholar 

  7. Dykedag SJ, Spencer BF Jr, Sain MK, Carlson JD (1998) An experimental study of MR dampers for seismic protection. Smart Mater Struct 7:693

    Article  ADS  Google Scholar 

  8. Chen B, Li C, Wilson B, Huang Y (2016) Fractional modeling and analysis of coupled MR damping system. IEEE/CAA J Autom Sin 3(3):288–294

    Article  MathSciNet  Google Scholar 

  9. Kallio M (2005) The elastic and damping properties of magnetorheological elastomers. Thesis for the degree of Doctor of Technology, VTT Technical Research Centre of Finland. ISBN: 9513864472

  10. Li Y, Li J, Li W, Du H (2014) A state-of-the art review on magnetorheological elastomer devices. Smart Mater Struct 23(12):123001

    Article  Google Scholar 

  11. Gundermann T, Cremer P, Löwen H, Menzel AM, Odenbach S (2017) Statistical analysis of magnetically soft particles in magnetorheological elastomers. Smart Mater Struct 26(4):045012

    Article  ADS  Google Scholar 

  12. Sapouna K, Xiong YP, Shenoi RA (2017) Dynamic mechanical properties of isotropic/anisotropic silicon magnetorheological elastomer composites. Smart Mater Struct 26(11):115010

    Article  ADS  Google Scholar 

  13. Li Y, Li J (2017) On rate-dependent mechanical model for adaptive magnetorheological elastomer base isolator. Smart Mater Struct 26(4):045001

    Article  ADS  Google Scholar 

  14. Gent AN (2012) Engineering with rubber—how to design rubber components. C.H. Verlag, Munich

    Book  Google Scholar 

  15. Girish M, Pranesh M (2009) Sliding isolation systems: state-of-the-art review. J Mech Civ Eng 2278(1684):30–35

    Google Scholar 

  16. Caged Ball Cross LM Guide—Catalog n.319E. https://tech.thk.com/upload/catalog_claim/pdf/car_scr_en.pdf

  17. Di Massa G, Pagano S, Rocca E, Strano S (2013) Sensitive equipment on WRS-BTU isolators. Meccanica 48(7):1777–1790

    Article  MATH  Google Scholar 

  18. Ni YQ, Ko JM, Wong CW (1998) Identification of non-linear hysteretic isolators from periodic vibration tests. J Sound Vib 217(4):737–756

    Article  ADS  Google Scholar 

  19. Ismail M, Ikhouane F, Rodellar J (2009) The hysteresis Bouc–Wen model, a survey. Arch Comput Methods Eng 16:161–188

    Article  MATH  Google Scholar 

  20. Ikhouane F, Rodellar J (2005) On the hysteretic Bouc–Wen model. Part I: forced limit cycle characterization. Nonlinear Dyn 42:63–78

    Article  MATH  Google Scholar 

  21. Yu Y, Li Y, Li J (2015) Parameter identification and sensitivity analysis of an improved LuGre friction model for magnetorheological elastomer base isolator. Meccanica 50:2691–2707

    Article  Google Scholar 

  22. Brancati R, Di Massa G, Pagano S (2017) A vibration isolator based on magneto-rheological elastomer. In: Advances in Italian mechanism science—proceedings of the first international conference of IFToMM Italy (IFIT2016) Vicenza (Italy), 1–2 Dec 2016. Springer, pp 483–490. ISBN 978-3-319-48375-7

  23. Di Massa G, Pagano S, Strano S, Timpone F (2013) A comparison between linear and nonlinear modelling of a wire rope seismic isolator. Int Rev Model Simul 6(4):1307–1313

    Google Scholar 

  24. Di Matteo A, Spanos PD, Pirrotta A (2018) Approximate survival probability determination of hysteretic systems with fractional derivative elements. Probab Eng Mech 54:138–146

    Article  Google Scholar 

  25. Graham KS (2012) Mechanical vibrations: theory and applications. Cengage Learning, Boston

    Google Scholar 

  26. Konstantinidis D, Kelly JM (2014) Advances in low-cost seismic isolation with rubber. In: Tenth U.S. national conference on earthquake engineering frontiers of earthquake engineering, Anchorage, Alaska, pp 21–25

  27. Eem SH, Jung HJ, Koo JH (2013) Seismic performance evaluation of an MR elastomer-based smart base isolation system using real-time hybrid simulation. Smart Mater Struct 22(5):055003

    Article  ADS  Google Scholar 

  28. Pagano S, Russo M, Strano S, Terzo M (2014) Seismic isolator test rig control using high-fidelity non-linear dynamic system modelling. Meccanica 49(1):169–179

    Article  MATH  Google Scholar 

  29. Li J, Li Y, Li W, Samali B (2013) Development of adaptive seismic isolators for ultimate seismic protection of civil structures. In: Sensors and smart structures technologies for civil, mechanical, and aerospace systems, San Diego, CA, USA, SPIE, pp 1–12

  30. Behrooz M, Wang X, Gordaninejad F (2014) Modeling of a new semi-active/passive magnetorheological elastomer isolator. Smart Mater Struct 23(4):045013

    Article  ADS  Google Scholar 

Download references

Acknowledgements

This research was funded by University of Naples Federico II under the project D.R. N. 408. The authors are grateful to Marco Di Vaio, Giuseppe Iovino and Gennaro Stingo for their collaboration during the setup construction and the execution of laboratory tests.

Author information

Authors and Affiliations

  1. Università di Napoli Federico II, Naples, Italy

    R. Brancati, G. Di Massa, S. Pagano & S. Santini

Authors
  1. R. Brancati
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. Di Massa
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Pagano
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. Santini
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. Pagano.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Brancati, R., Di Massa, G., Pagano, S. et al. A magneto-rheological elastomer vibration isolator for lightweight structures. Meccanica 54, 333–349 (2019). https://doi.org/10.1007/s11012-019-00951-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11012-019-00951-2

Keywords

Search

Navigation