, Volume 53, Issue 7, pp 1661–1672 | Cite as

Upper bound limit analysis of masonry retaining walls using PIV velocity fields

  • Benjamin Terrade
  • Anne-Sophie Colas
  • Denis Garnier
New Trends in Mechanics of Masonry


Masonry is the building of structures from individual units, with or without the use of mortar as a bonding component. Stone masonry structures are frequent in the regions where stones are ubiquitous. In Europe, it was massively used until the nineteenth century to build earth retaining walls. For instance, they represent 85% of the retaining walls in Great Britain and 60% in France. Most of these masonry walls are currently perfectly safe, showing an average durability of more than a century. The best economic interest is to maintain the stock in good order by identifying and repairing the structures at risk of collapse and to preserve the currently satisfactory structures at the lowest investment level. Unfortunately, there is not sufficient scientific knowledge to do so reliably. This work aims to develop a design method suitable for existing structures. The analytical model is based upon the yield design theory which provides a rigorous framework and has proven to be effective for this kind of structures. The strength domain of stone masonry is determined using the homogenization theory. The modelisation is carried out in 2D. An experimental campaign was carried out in order to verify the proposed model. The experimental setup is in 2D thanks to the use of Schneebeli rods and is considered to be a physical model and is not scaled. The theoretical failing load and the theoretical kinematics of the failure are compared with the experimental failing load and the actual kinematics of the failure. The discrepancies and differences between the two sets are then discussed.


Masonry Yield design Structural analysis 



The authors would like to warmly thank Patrick Boujard (IFSTTAR) and Chloé Richet (Ecole Nationale des Travaux Publics de l’Etat) for their assistance with the experimental programme, and Peter Vennemann for freely providing his software package for particle image velocimetry, JPIV.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.


  1. 1.
    Brady K, Kavanagh J (2002) Analysis of the stability of masonry-faced earth retaining walls. Technical report, Transport Research FoundationGoogle Scholar
  2. 2.
    Burgoyne J (1853) Revetments or retaining walls. Corps R Eng Paper 3:154–159Google Scholar
  3. 3.
    Claxton M, Hart R, McCombie P, Walker P (2005) Rigid block distinct-element model of dry-stone retaining walls in plane strain. J Geotech Geoenviron Eng 131:381–389CrossRefGoogle Scholar
  4. 4.
    Colas A-S (2009) Mécanique des murs de soutènement en pierre sèche : modélisation par le calcul à la rupture et expérimentation échelle 1. PhD thesis, Ecole Centrale de LyonGoogle Scholar
  5. 5.
    Colas A-S, Garnier D, Morel J-C (2013) Yield design modelling of dry joint retaining structures. Constr Build Mater. 41:912–917CrossRefGoogle Scholar
  6. 6.
    Colas A-S, Morel J-C, Garnier D (2008) Yield design of dry-stone masonry retaining structures—comparisons with analytical, numerical and experimental data. Int J Numer Anal Methods Geomech 32:1817–1832CrossRefMATHGoogle Scholar
  7. 7.
    Colas A-S, Morel J-C, Garnier D (2009) 2D modelling of a dry joint masonry wall retaining a pulverulent backfill. Int J Numer Anal Methods Geomech 34:1237–1249MATHGoogle Scholar
  8. 8.
    Colas A-S, Morel J-C, Garnier D (2010) Full-scale field trials to assess dry-stone retaining wall stability. Eng Struct 32:1215–1222CrossRefGoogle Scholar
  9. 9.
    De Buhan P, De Felice G (1997) A homogenization approach to the ultimate strength of brick masonry. J Mech Phys Solids 45(7):1085–1104ADSMathSciNetCrossRefMATHGoogle Scholar
  10. 10.
    Gigan J-P (1986) Applications du clouage en soutènement : paramètres de conception et de dimensionnement des ouvrages. Bulletin de Liaison des Laboratoires des Ponts et Chaussées 143:51–64Google Scholar
  11. 11.
    Hardiyatmo H (1995) Approche expérimentale du dimensionnement des massifs renforcés à parement cellulaire. PhD thesis, Université Joseph Fourier–Grenoble 1Google Scholar
  12. 12.
    Le H H (2013) Stabilité des murs de soutènement routiers en pierre sèche : Modélisation 3D par le calcul à la rupture et expérimentation échelle 1. PhD thesis, ENTPEGoogle Scholar
  13. 13.
    Le HH, Morel J-C, Garnier D, McCombie P (2012) A review of method for modelling drystone retaining walls. Proc Inst Civil Eng Geotech Eng 167:262–269CrossRefGoogle Scholar
  14. 14.
    Milosevic J, Gago A, Lopes M, Bento R (2013) Experimental assessment of shear strength parameters on rubble stone masonry specimens. Constr Build Mater 47:1372–1380CrossRefGoogle Scholar
  15. 15.
    Mundell C (2009) Large scale testing of drystone retaining structures. PhD thesis, University of BathGoogle Scholar
  16. 16.
    Mundell C, McCombie P, Bailey C, Heath A, Walker P (2009) Limit-equilibrium assessment of drystone retaining structures. Proc Inst Civil Eng Geotech Eng 162:203–212CrossRefGoogle Scholar
  17. 17.
    Salençon J (2013) Yield design (Mechanical engineering and solid mechanics). Wiley, New YorkGoogle Scholar
  18. 18.
    Thierry F, Boete E, Lefebvre M, Desille J (2011) IQOA murs campagne d’évaluation 2010 dossier national. Technical Report ISRN : EQ-SETRA-11-ED07-FR, Sétra - Service d’études sur les transports, les routes et leurs aménagementsGoogle Scholar
  19. 19.
    Vasconcelos G, Lourenco P (2009) Experimental characterization of stone masonry in shear and compression. Constr Build Mater 23:3337–3345CrossRefGoogle Scholar
  20. 20.
    Vennemann P (2015) Jpiv homepage.
  21. 21.
    Villemus B (2004) Etude des murs de soutènement en maçonnerie de pierres sèches. PhD thesis, INSA de LyonGoogle Scholar
  22. 22.
    Villemus B, Morel J-C, Boutin C (2007) Experimental assessment of dry stone retaining wall stability on a rigid foundation. Eng Struct 29:2124–2132CrossRefGoogle Scholar
  23. 23.
    Walker P, McCombie P, Claxton M (2007) Plane strain numerical model for drystone retaining walls. Proc Inst Civil Eng Geotech Eng 160:97–103CrossRefGoogle Scholar
  24. 24.
    White DJ, Take WA, Bolton MD (2003) Soil deformation measurement using particle image velocimetry (piv) and photogrammetry. Géotechnique 53:619–631CrossRefGoogle Scholar
  25. 25.
    Zhang X, Koutsabeloulis NC, Hope S, Pearce A (2004) A finite element analysis for the stability of drystone masonry retaining walls. Géotechnique 54:57–60CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2017

Authors and Affiliations

  1. 1.Université Paris-Est, MAST, SDOA, IFSTTARMarne-la-ValléeFrance
  2. 2.Université Paris-Est, Laboratoire Navier (UMR 8205), ENPC, IFSTTAR, CNRSMarne-la-ValléeFrance

Personalised recommendations