Abstract
The thermal buckling problem of functionally graded beam with longitudinal crack is presented in the paper. The whole beam is divided into four sub-beams and each one is modeled as a Timoshenko beam. The buckling governing equation of each sub-beam in thermal environment is established by using Hamilton Principle. Combining with the boundary conditions, the continuous conditions of the displacements and the forces, the buckling governing equations are solved by both the analytical and numerical methods. The buckling modes and critical buckling temperatures are obtained, and the effects of the functionally graded index, crack length, crack depth, and crack longitudinal location on the buckling characteristics of beams are discussed in numerical examples.
Similar content being viewed by others
References
Bert CW, Malik M (1996) Differential quadrature method in computational mechanics: a review. Appl Mech Rev 49:1–28
Koizumi M (1997) FGM activities in Japan. Composites 28(1–2):1–4
Javaheri R, Eslami MR (2002) Thermal buckling of functionally graded plates. AIAA J 40(1):162–169
Liew KM, Yang J, Kilipomchia S (2003) Post-bucking of piezoelectric FGM plates subject to thermo-electro-mechanical loading. Int J Solids Struct 41(15):386–392
Najafizadeh MM, Heydari HR (2004) Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory. Eur J Mech A, Solids 23:1085–1100
Samsam Shariat BA, Eslami MR (2007) Buckling of thick functionally graded plates under mechanical and thermal loads. Compos Struct 78:433–439
Shen HS (2007) Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties. Int J Mech Sci 49:466–478
Zenkour AM, Sobhy M (2010) Thermal buckling of various types of FGM sandwich plates. Compos Struct 93:93–102
Gao YC (1987) Plane stress dynamic plastic field near a propagation crack-tip. Int J Fract 34:111–129
Kishen JMC, Kumar A (2004) Finite element analysis for fracture behavior of cracked beam-columns. Finite Elem Anal Des 40:l773–l789
Noda N (1999) Thermal stresses in functionally graded materials. J Therm Stresses 22(4):477–512
Li QS (2001) Buckling of multi-step cracked columns with shear deformation. Eng Struct 23(4):356–364
Wang Q, Quek ST (2005) Repair of cracked beam under axially compressive load via piezoelectric patch. Comput Struct 83(15):1355–1363
Zhou L, Huang Y (2006) Crack effect on the elastic buckling behavior of axially and eccentrically loaded beams. Struct Eng Mech 22(2):169–184
Yang J, Chen Y (2008) Free vibration and buckling analyses of functionally graded beams with edge cracks. Compos Struct 83(1):48–60
Matbuly MS (2009) Multiple crack propagation along the interface of a nonhomogeneous composite subjected to anti-plane shear loading. Meccanica 44:547–554
Ke L-L, Yang J, Kitipornchai S (2009) Postbuckling analysis of edge cracked functionally graded Timoshenko beams under end shortening. Compos Struct 90:152–160
Malekzadeh P, Golbahar Haghighi MR, Alibeygi Beni A (2012) Buckling analysis of functionally graded arbitrary straight sided quadrilateral plates on elastic foundations. Meccanica 47:321–333
Li YL, Fu YM (2011) Analysis of delamination fatigue growth for delaminated piezoelectric elasto-plastic laminated beams under hydrothermal conditions. Compos Struct 93:889–901
Chue C-H, Yeh C-N (2011) Mode III fracture problem of two arbitrarily oriented cracks located within two bonded functionally graded material strips. Meccanica 46:447–469
Acknowledgements
This project is supported by the National Natural Science Foundation of China (No. 11072076).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fu, Y., Chen, Y. & Zhang, P. Thermal buckling analysis of functionally graded beam with longitudinal crack. Meccanica 48, 1227–1237 (2013). https://doi.org/10.1007/s11012-012-9663-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-012-9663-x