We study the influence of decrease in the magnesium content and alloying with scandium, zirconium, manganese, and chromium on the structure, phase composition, strength, plasticity, corrosion potential, and corrosion current in alloys of Al−Mg and Al−Mg−Sc systems obtained with the help of a magnetohydrodynamic foundry. The positive influence of lowering of the content of magnesium and replacement of manganese with chromium in alloys of the Al−Mg−Sc system is demonstrated.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
V. V. Panasyuk (editor), Fracture Mechanics and Strength of Materials: A Handbook, Vol. 9: О. P. Ostash, V. M. Fedirko. V. M. Uchanin, S. A. Bychkov, O. H. Molyar, O. I. Semenets, V. S. Kravets, and V. Ya. Derecha, Strength and Durability of Aircraft Materials and Structural Elements [in Ukrainian], Spolom, Lviv (2007).
A. Ya. Ishchenko and T. M. Labur, Weldable Aluminum Alloys with Scandium [in Russian], KVITs, Kiev (1999).
Yu. A. Filatov, V. I. Yelagin, and V. V. Zakharov, “New Al−Mg−Sc alloys,” Mater. Sci. Eng., A280, 97–101 (2000).
А. V. Bronz, V. I. Efremov, А. D. Plotnikov, and А. G. Chernyavskii, “1570С alloy as a material for hermetic structures of promising reusable products of the “Énergiya” Rocket and Space Corporation,” Kosmich. Tekh. Tekhnol., 7, No. 4, 62–67 (2014).
M. Li, Q. Pan, Y. Wang, and Y. Shi, “Fatigue crack growth behavior of Al–Mg–Sc alloy,” Mater. Sci. Eng., A598, 350–354 (2014).
M. T. Fernandes, Aluminium–Magnesium–Scandium Alloys with Hafnium, Patent PCT/US00/19559 (Int. Publ. Number WO 01/12868 A1), Publ. on 22.02.2001.
L. P. Puzhailo, A. V. Seryi, and S. L. Polivoda, “Technology and equipment for the production of ingots of high-strength deformable aluminum alloys by the method of semicontinuous casting,” Visn. Donbas. Derzh. Mashynobud. Akad., No. 3, 227–229 (2010).
L. P. Puzhailo, О. V. Siryi, and S. L. Polyvoda, Installation for the Preparation and Electromagnetic Pouring of Aluminum Alloys in Molds [in Ukrainian], Patent of Ukraine No. 100231, Publ. on 10.12.12, Bull. No. 23.
L. P. Puzhailo, О. V. Siryi, and S. L. Polyvoda, Method for the Refinement of Aluminum Alloys in a Vacuum [in Ukrainian], Patent of Ukraine No. 108781, Publ. on 10.06.15, Bull. No. 11.
L. P. Puzhailo, S. L. Polyvoda, О. V. Siryi, and О. М. Hordynya, Melting and Casting Complex for Semicontinuous Casting of Ingots of Aluminum Alloys [in Ukrainian], Patent of Ukraine No. 119406, Publ. on 25.09.17, Bull. No. 18.
A. G. Gavras, B. F. Chenelle, and D. A. Lados, “Effects of microstructure on the fatigue crack growth behavior of light metals and design considerations,” Matéria (Rio J.), 15 (2), 319–329 (2010).
E. Avtokratova, O. Sitdikov, R. Kaibyshev, and Y. Watanabe, “Fatigue crack growth behavior of ultrafine-grained Al–Mg–Sc alloy produced by ECAP,” Mater. Sci. Forum, 584–586, 821–826 (2008).
V. Kh. Mann, А. Yu. Krokhin, А. N. Alabin, and А. P. Khromov, Alloy Based on Aluminum [in Russian], Patent RU 2 683 399 C1, Publ. on 23.03.2019, Bull. No. 10.
M. E. Drits, L. S. Toropova, and Yu. G. Bykov, “Recrystallization of Al−Sc alloys,” Izv. Akad. Nauk SSSR. Metally, No. 1, 173–178 (1982).
F. A. Derkach, Chemistry [in Ukrainian], Franko Lviv State University, Lviv (1968).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 56, No. 4, pp. 122–127, July–August, 2020.
Rights and permissions
About this article
Cite this article
Ostash, О.P., Polyvoda, S.Y., Narivskyi, А.V. et al. Influence of Chemical Composition on the Structure, Mechanical, and Corrosion Properties of Cast Alloys of the Al–Mg–Sc System. Mater Sci 56, 570–576 (2021). https://doi.org/10.1007/s11003-021-00465-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-021-00465-x