To find the ways of increasing the brittle-fracture resistance of the metal in the heat-affected zone formed as a result of repair surfacing of the rolling surface of railroad wheels, we study the influence of various modes of heat treatment, including the traditional and modified (by the authors) Q-n-Ptreatments on the mechanical properties of 65G steel regarded as a model wheel steel. It is shown that, after the modified Q-n-P-treatment, the mechanical characteristics of steel increase to a greater extent than after the traditional treatment. However, according to the parameter of structural strength P = [ΔU · ΔKth · ΔKfc ], where ΔU is the ultimate strength, ΔKth is the fatigue threshold, and ΔKfc is the cyclic fracture toughness of the material, the mode of treatment proposed earlier, which leads to the relaxation of stresses of the second kind in the bulk of martensite and bainite lathes, proves to be more efficient.
Similar content being viewed by others
References
DSTU GOST 10791-2016. Solid-Rolled Wheels. Technical Specifications [in Ukrainian] (2016).
AAR Manual of Standards and Recommended Practices Wheels and Axles. M-107/M-208-2011. Wheels, Carbon Steel. Specification (2011).
O. P. Ostash, V. H. Anofriev, I. M. Andreiko, L. A. Muradyan, and V. V. Kulyk, “On the concept of selection of steels for high-strength railroad wheels,” Fiz.-Khim. Mekh. Mater.,48, No. 6, 7–13 (2012); English translation:Mater. Sci.,48, No. 6, 697–703 (2013).
A. А. Gaivoronskii, V. D. Poznyakov, V. А. Sarzhevskii, V. G. Vasil’ev, and V. Yu. Orlovskii, “Influence of the thermal deformation cycle of surfacing on the structure and properties of railroad wheels of elevated strength in the course of their restoration,” Avtomat. Svarka, No. 5, 22–26 (2010).
O. А. Haivorons’kyi, V. D. Poznyakov, L. І. Markashova, О. P. Ostash, V. V. Kulyk, Т. О. Alekseenko, and О. S. Shyshkevych, “Structure and mechanical properties of the heat-affected zone of restored railway wheels,” Fiz.-Khim. Mekh. Mater.,51, No. 4, 114−119 (2015); English translation:Mater. Sci.,51, No. 4, 563–569 (2016).
О. P. Ostash, O. А. Haivorons’kyi, V. D. Poznyakov, and V. V. Kulyk, A Method of Thermal Treatment of High-Strength Low- Alloyed Carbon Steels [in Ukrainian], Patent of Ukraine No. 105440, Publ. on 25.03.2016, Bull. No. 6.
J. Speer, D. K. Matlock, B. C. De Cooman, and J. G. Schroth, “Carbon partitioning into austenite after martensite transformation,” Acta Mater.,51, 2611–2622 (2003).
D. V. Edmonds, K. He, F. C. Rizzo, B. C. De Cooman, D. K. Matlock, and J. G. Speer, “Quenching and partitioning martensite —A novel steel heat treatment,” Mater. Sci. Eng.: A,438–440, 25–34 (2006).
T. Y. Hsu, X. J. Jin, and Y. H. Rong, “Strengthening and toughening mechanisms of quenching-partitioning-tempering (Q–P–T) steels,” J. Alloys Comp.,577S, 568–571 (2013).
H. Jirková, B. Masek, M. F.-X. Wagner, D. Langmajerová, L. Kucerová, R. Treml, and D. Kiener, “Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process,” J. Alloys Comp.,615, 163–168 (2014).
S. G. Liu, S. S. Dong, and F. Yang, “Application of quenching-partitioning-tempering process and modification to a newly designed ultrahigh carbon steel,” Mater. Design.,56, 37–43 (2014).
V. G. Efremenko, V. I. Zurnadzhi, Yu. G. Chabak, O. V. Tsvetkova, and A. V. Dzherenova, “Application of the Q-n-P-treatment for increasing the wear resistance of low-alloy steel with 0.75% C,” Fiz.-Khim. Mekh. Mater.,53, No. 1, 61–68 (2017); English translation:Mater. Sci.,53, No. 1, 67–75 (2017).
V. V. Panasyuk (editor), Fracture Mechanics and Strength of Materials: A Handbook, Vol. 15: O. P. Ostash, Structure of Materials and Fatigue Life of Structural Elements [in Ukrainian], Spolom, Lviv (2015).
L. Akselrud and Y. Grin, “WinCSD: software package for crystallographic calculations (Version 4),” J. Appl. Crystallogr.,47, 803–805 (2014).
Test Method for Measurement of Fatigue Crack Growth Rates. ASTM Standard E647-99 (1999).
E. De Moor, S. Lacroix, A. J. Clarke, J. Penning, and J. G. Speer, “Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels,” Metallurg. Mater. Trans.: A,39, 2586–2595 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 54, No. 6, pp. 24–29, November–December, 2018.
Rights and permissions
About this article
Cite this article
Ostash, О.P., Kulyk, V.V., Poznyakov, V.D. et al. Influence of the Modes of Heat Treatment on the Strength and Cyclic Crack-Growth Resistance of 65G Steel. Mater Sci 54, 776–782 (2019). https://doi.org/10.1007/s11003-019-00263-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-019-00263-6