We propose an algorithm for the analysis of thermal fatigue cracks on the surfaces of rollers of continuous casting machines that does not require adaptation to images of various types and individual choice of parameters. For this purpose, the images are analyzed for a sufficiently large subset of the sets of values of the parameters. The result of this classification is regarded as a fuzzy set with a membership function of each element equal to the number of sets of parameters responsible for the detection of this element as a component of the frame of the damage grid.
Similar content being viewed by others
References
O. Yu. Povstyanoi, V. D. Rud’, Yu. A. Mel’nyk, and N. Yu. Imbirovych, “Analysis of the contemporary methods of determination of the structure and surface topology of materials,” Tekh. Diagnost. Nerazrush. Kontr., No. 2, 37–42 (2014).
S. V. Panin, P. O. Maruschak, P. S. Lyubutin, I. V. Konovalenko, and B. B. Ovechkin, “Application of meso- and fracture mechanics to material affected by a network of thermal fatigue cracks,” Int. J. Fatigue, 76, 33–38 (2014).
R. J. Kosarevych, B. P. Rusyn, V. V. Korniy, and T. I. Kerod, “Image segmentation based on the evaluation of the tendency of image elements to form cluster with the help of point field characteristics,” Cybern. & Syst. Anal., 51, 704–713 (2015).
B. E. Kapustiy, B. P. Rusyn, and V. A. Tayanov, “Peculiarities of application of statistical detection criteria for problem of pattern recognition,” J. Automat. & Inform. Sci., 37, No. 2, 30–36 (2005)
R. Ya. Kosarevych, O. Z. Student, L. M. Svirs’ka, B. P. Rusyn, and H. M. Nykyforchyn, “Computer analysis of characteristic elements of fractographic images,” Fiz.-Khim. Mekh. Mater., 48, No. 4, 53–60 (2012); English translation: Mater. Sci., 48, No. 4, 474–481 (2013).
M. Kobasyar and B. Rusyn, “The Radon transform application for accurate and efficient curve,” in: Proc. Internat. Conf. “Modern Problems of Radio Engineering, Telecommunications, and Computer Science” (TCSET-2004) [in Ukrainian], Lviv–Slavs’ke (2004), pp. 233–234.
P. O. Marushchak, O. P. Yasnii, and I. V. Konovalenko, “Prediction of damages of the surface of rollers of continuous casting machine caused by cracking,” Visn. Donbas. Derzh. Mashynobud. Akad., 9, No. 3, 163–168 (2007).
M. H. Karimi and D. Asemani, “Surface defect detection in tiling Industries using digital image processing methods: Analysis and evaluation,” ISA Transact., 53, 834–844 (2014).
W. Zhang, Zh. Zhang, D. Qi, and Yu. Liu, “Automatic crack detection and classification method for subway tunnel safety monitoring,” Sensors, 14, No. 10, 19307–19328 (2014).
T. Yamaguchi, S. Nakamura, R. Saegusa, and S. Hashimoto, “Image-based crack detection for real concrete surfaces,” IEEJ Trans. Elec. Electron. Eng., 3, 128–135 (2008).
B. Xu and Ya. Huang, Development of an Automatic Pavement Surface Distress Inspection System, Center for Transport. Research at the Univ. Texas at Austin (2005).
V. Malekian, R. Amirfattahi, M. Rezaeian, A. Aghaei, and P. Rahimi, “Automatic detection and localization of surface cracks in continuously cast hot steel slabs using digital image analysis techniques,” Int. J. ISSI, 9, 30–40 (2012).
P. Prasanna, K. Dana, N. Gucunski, and B. Basily, “Computer-vision based crack detection and analysis,” in: SPIE Smart Structures and Materials+Nondestructive Evaluation and Health Monitoring, Int. Soc. for Optics and Photonics, San Diego, USA (2012), pp. 834542–834542-6.
P. V. Yasnii, I. V. Konovalenko and P. O. Marushchak, “On the investigation of geometric parameters of a grid of thermal fatigue cracks,” Visn. Dnipropetr. Nats. Univ., Ser. “Mechanics,” 16, No. 5, 182–189 (2008).
I. V. Konovalenko and P. O. Maruschak, “Error analysis of algorithm for identifying thermal fatigue cracks,” Optoelectron. Instrum. & Data Proc., 47, No. 4, 49–57 (2011).
P. Maruschak, V. Gliha, I. Konovalenko, T. Vuherer, and S. Panin, “Physical regularities in the cracking of nanocoatings and a method for an automated determination of the crack-network parameters,” Mater. Tech., 46, No. 5, 525–529 (2012).
D. Bradley and G. Roth, “Adaptive thresholding using the integral image,” J. Graphics Tools, 12, No. 2, 13–21 (2007).
I. V. Konovalenko, O. A. Pastukh, and P. O. Marushchak, “Using fuzzy sets to estimate the geometric parameters of surface damage,” Optoelectron. Instrum. & Data Proc., 52, No. 4, 319–327 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 54, No. 2, pp. 41–48, March–April, 2018.
Rights and permissions
About this article
Cite this article
Konovalenko, І.V., Marushchak, P.О. & Kuz’, О.N. A Method for Processing and Analysis of the Images of a Network of Thermal Fatigue Cracks on the Surfaces of Rollers of Continuous Casting Machines. Mater Sci 54, 175–183 (2018). https://doi.org/10.1007/s11003-018-0171-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-018-0171-6