Materials Science

, Volume 54, Issue 2, pp 154–162 | Cite as

Efficient Injection Materials and the Technologies of Restoration of the Serviceability of Damaged Building Structures Intended for Long-Term Operation

  • V. V. Panasyuk
  • V. І. Marukha
  • V. P. SylovanyukEmail author

We generalize the results of investigations of the possibility of restoration of the durability of damaged building reinforced-concrete structures intended for long-term operation carried out at the Karpenko Physicomechanical Institute of the Ukrainian National Academy of Sciences and the “Tekhno-Resurs Engineering Center” State Enterprise of the Ukrainian National Academy of Sciences for the last 15 years.


strength concrete injection technologies fracture 


  1. 1.
    V. V. Panasyuk, V. I. Marukha, and V. P. Sylovanyuk, Injection Technologies for Repair of Damaged Concrete Structures, Springer (2014).Google Scholar
  2. 2.
    V. V. Panasyuk, V. P. Sylovanyuk, and V. I. Marukha, “Strength of cracked structural elements healed by injection methods,” Fiz.-Khim. Mekh. Mater., 41, No. 6, 60–64 (2005); English translation: Mater. Sci., 41, No. 6, 777–783 (2005).Google Scholar
  3. 3.
    L. Carnecki and P. H. Emmons, Naprava i Ohrona Konstrukcji Betonowych, Polski Cement, Krakow (2002).Google Scholar
  4. 4.
    V. P. Sylovanyuk, and V. I. Marukha, B. Ya. Heneha, and N. A. Ivantyshyn, “Fracture mechanics as a scientific foundation of the technology of sealing injections during reconstruction of objects after long-term operation,” in: Fracture Mechanics and Physics of Building Materials and Structures: Collection of Scientific Works [in Ukrainian], Issue 5, Kamenyar, Lviv (2002), pp. 373–382.Google Scholar
  5. 5.
    “ACI-89 M12 503-5R Guide for the selection of polymer adhesives with concrete,” ACI Mater. J., No. 1-2, 90–105 (1992).Google Scholar
  6. 6.
    V. I. Marukha and Ya. А. Serednyts’kyi, “Specific features of injection hardening of cracked concrete structures and buildings with polyurethanes,” Fiz.-Khim. Mekh. Mater., 44, No. 6, 99–103 (2008); English translation: Mater. Sci., 44, No. 5, 720–725 (2008).Google Scholar
  7. 7.
    V. I. Marukha Ya. А. Serednyts’kyi, V. K. Piddubnyi, and M. P. Voloshyn, “Improved polyurethane and polyepoxy injection materials for the restoration of concrete and reinforced-concrete structures,” Budiv. Konstr.: Mizhvid. Nauk.-Tekh. Zbirn., Issue 72, 465–470 (2009).Google Scholar
  8. 8.
    W. Marukha, J. Serednicki, and M. Voloshyn, “Injekcyjne compozycje plynne i wkladki polimerowe do wypelniania pęknięc I rys przy odnowieniu budowli zelbetonowych,” Tworz. Sztuczne Chem., No. 6, 20–22 (2009).Google Scholar
  9. 9.
    V. I. Marukha, V. M. Fedirko, Ya. А. Serednyts’kyi, А. Т. Pichugin, О. H. Luk’yanenko, and М. P. Voloshyn, “Development of two-component cold-curing polymeric materials and their introduction to industry,” Nauka Innovats., 8, No. 5, 49–56 (2012).CrossRefGoogle Scholar
  10. 10.
    V. P. Sylovanyuk, V. I. Marukha, and N. V. Onyshchak, “Residual strength of cylindrical elements with cracks healed by using an injection technology,” Fiz.-Khim. Mekh. Mater., 43, No. 1, 99–103 (2007); English translation: Mater. Sci., 43, No. 1, 109–116 (2007).Google Scholar
  11. 11.
    V. Panasyuk, V. Sylovanyuk, and V. Marukha, “Static and cyclic strength of a cracked body which strengthened by injection technologies,” Acta Mech. Automat., 1, No. 1, 85–88 (2007).Google Scholar
  12. 12.
    V. P. Sylovanyuk, V. I. Marukha, and N. V. Onyshchak, “Strength of a body containing a crack partially filled with injection material,” Fiz.-Khim. Mekh. Mater., 45, No. 5, 77–80 (2009); English translation: Mater. Sci., 45, No. 5, 696–701 (2009).Google Scholar
  13. 13.
    V. P. Sylovanyuk, V. I. Marukha, R. Ya. Yukhym, and N. V. Onyshchak, “Strengthening of concrete as a result of filling of the pores and cavities,” Fiz.-Khim. Mekh. Mater., 46, No. 1, 62–66 (2010); English translation: Mater. Sci., 46, No. 1, 70–75 (2010).Google Scholar
  14. 14.
    G. R. Irwin, “Analysis of stresses and strains near the end of a crack traversing a plate,” J. Appl. Mech., 24, No. 3, 361–364 (1957).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. V. Panasyuk
    • 1
  • V. І. Marukha
    • 2
  • V. P. Sylovanyuk
    • 1
    Email author
  1. 1.Karpenko Physicomechanical InstituteUkrainian National Academy of SciencesLvivUkraine
  2. 2.“Tekhno-Resurs Engineering Center” State EnterpriseUkrainian National Academy of SciencesLvivUkraine

Personalised recommendations